perpetual WHERE can i buy thread?

[calvin]

C.O. = convenience outlet?

Question: San makakabili ng orig asics/onitsuka tigers shoes? 

https://www.onitsukatiger.com/ph/en-ph/store-finder

yes, a C.O. is a convenience outlet

[lahar]

Where to buy living room/mancave bean bags?

[borgy_t]

where to buy DDR3 ECC RAM locally? brand new of course. newegg is the last resort.

[calvin]

where to buy DDR3 ECC RAM locally? brand new of course. newegg is the last resort.

try PTSI... https://www.ptsiphil.com/contact-us/

[Capcom]

May alam kayo saan locally makakahanap ng battery ng Sena Bluetooth Headsets for MotorCycle

[wheelee]

check here sir, baka may naligaw

https://www.lazada.com.ph/products/battery-lithium-ion-polymer-37v-500mah-i111658003-s113846207.html

[Capcom]

Thanks sir Willy , it's 500mah , okay lang siguro as long as same 3.7v and physical size ?

[wheelee]

As long as same voltage & a bit higher mah is OK, lower mah will have shorter usage time. Bastat wag lalagpas o tataas sa original Voltage.


syempre importante yung kakasya sya sa original housing

[WallyWest]

I'm looking for Arduino starter kits in Shopee and Lazada but I have no idea what's the best to start with.
Is this OK? If it is, which board should I get? Original UNO seems to be the priciest one so I assume it has the most functionality?
https://shopee.ph/2021!!!-Starter-Kit-for-Arduino-Upgraded-RFID-and-Stepper-Driver-Latest-i.20469516.867736672
There's also this one but I see some 1-star reviews.

https://www.lazada.com.ph/products/uno-advance-upgraded-starter-arduino-kit-latest-version-2020-with-pdf-manual-full-set-makerlab-electronics-i159910350-s7482078479.html?spm=a2o4l.searchlist.list.1.5ef75054X07ZDZ&search=1

[motion55]

^^^I have not tried  that particular kit. A photo of the contents of that kit show the Arduino Uno R3 is an exact clone using an ATMega16U2 (clone?) instead of a Chinese CH340 chip.

I bought several of the DFRobot beginner's kit for my son and his cousins several years ago. But they were pricey back then and it has less of the modules in the kit. The illustrations for the examples are quite good though. With my son's permission and since he is not longer touching the kit at all, I donated the kit along with other Arduino parts to a STEM high school requesting for used Arduino kits. I promised my son for more advanced development boards in case he is interested.

https://www.lazada.com.ph/products/dfrobot-arduino-uno-starter-kit-v3-i124524443-s130086235.html

Makerlabs is a good vendor. I recently bought from them a couple of Raspberry Pi Pico boards after I learned the Picos are now supported by the Arduino IDE v1.8.15. I just uploaded a quick Blinky program to it just to see they were good. Makerlabs is also in Shopee.

https://shopee.ph/Raspberry-Pi-Pico-RP2040-Microcontroller-i.18252381.8515966380

If you are into more advanced stuff, I would suggest getting STM32 Discovery and Nucleo boards. The best place to buy them IMHO is from Mouser. Shipping becomes free above $50 order the last time I bought. If you just want to try STM32 without spending too much, you can buy STM32F103 "Bluepill" boards. You would need to buy clone STl-Link V2 programmers/debuggers.

https://shopee.ph/STM32-STM32F103C8T6-Mini-Board-i.237034143.3924328825
https://shopee.ph/ST-LINK-V2-Programmer-Debugger-STLINK-i.237034143.7737541891

[WallyWest]

That DFRobot kit looks sweet and organized. I think I'll get that one. Thanks for the recommendations!

[dean]

need help looking for this:


or anything similar for that matter.  should be able to fit the 1" base of the driving lights.

the part is called hella mounting hardware but i figured that there could be alternatives for it.  thanks so much!

[friendlyfire]

https://www.lazada.com.ph/products/1pair-stainless-steel-car-light-holder-led-light-mounting-bracket-hood-engine-lamp-bracket-clips-4x4-offroad-light-install-clamp-i2094502834-s9343136321.html?spm=a2o4l.searchlist.list.77.62675532upE7xx&search=1

https://www.lazada.com.ph/products/balikha-car-hood-led-work-light-bar-mounting-bracket-holder-solid-adjustable-i1951843571-s8445228634.html?spm=a2o4l.searchlist.list.4.99395532RVhRfV&search=1

https://www.lazada.com.ph/products/led-bar-holder-mounting-bracket-car-work-light-fog-lamp-hood-clamp-auto-engine-cover-suv-off-road-4x4-rotatable-lights-mount-i1919338911-s8192465125.html?spm=a2o4l.searchlist.list.40.99395532pgBKQ9&search=1&freeshipping=1

[dean]

off topic:

got any recommendations for someone who can design a birthday cake for a kid's 1st birthday?

[wheelee]

^ a friend of mine bakes those designer cakes that looks almost the same as the real thing na nakaka panghinayang hiwain hehehe
pero nasa VN sya at the moment & i'm sure na meron din dyan na magaling sa ganyan


Transformer Cake? 

[motion55]

^^^Have the icing 3D printed with the Kid's fav action figure?

[Capcom]

Where to buy Bitmain Antminer S19 / S19 Pro bnew or refurbished

may nakita akong site... too cheap.. feels like a scam... 
https://antminersale.com/product-category/bitmain/

[WallyWest]

Any recommendations for electric polisher for wood floors? Senior ang gagamit so it has to be usable while standing up.
Can't find any useful info sa usual online shopping apps. I see some USB rechargeable polishers but all of it look like toys.

[Capcom]

Any suggestions for an Industrial Type Metal Rack ?


saw this brand whalen @ SNR , its a bit expensive priced around 9-10k each , planning to buy around 3-4 racks

baka meron kayo ma suggest na iba or somewhere cheaper