Author Topic: modders...dremel tool question  (Read 1429 times)

alfie

  • Guest
modders...dremel tool question
« on: September 05, 2002, 07:51:59 PM »
hi... to my surprise meron palang kaming dremel tool.. pero walang mga attachments... anong attachment ang kailangan to cut blowholes? or the grills sa mga casings? where can i buy them and approximately how much do they cost? thnks peeps

alfie

  • Guest
modders...dremel tool question
« Reply #1 on: September 05, 2002, 11:14:52 PM »
follow up  - ideally san ba dapat naka tutok ang intake fan kung sa side lalagay? sa cpu? chipset? ??

Offline JigglyPimp

  • Newbie
  • *
  • Posts: 0
modders...dremel tool question
« Reply #2 on: September 06, 2002, 03:58:54 AM »
sa XM 2/F Kamagong lane Virra Mall

They sell Cutting Disc and Mandrel attachment for Dremel/RTX.

THE_13TH

  • Guest
modders...dremel tool question
« Reply #3 on: September 06, 2002, 04:11:40 AM »
dapat sa CPU ang tutok para yung mahihigop ng fan ng HSF mo ay malamig

Offline Cuto

  • Newbie
  • *
  • Posts: 0
modders...dremel tool question
« Reply #4 on: September 06, 2002, 04:27:51 AM »
di ba palabas ang dierction ng hsf?

XiBlade

  • Guest
modders...dremel tool question
« Reply #5 on: September 07, 2002, 02:38:27 AM »
i agree with THE_13TH ideally if you have an intake at the sidepanel you'd want to position it over your cpu so you'll have cooler air blowing towards your proc... you could also have 1 more blowing at your pci slots!



and if you really want to improve your air flow, you can add a blow hole at your top panel which i think is the most ideal place to install your exhaust...