Author Topic: Looking for a modder/fabricator  (Read 3061 times)

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Looking for a modder/fabricator
« on: January 14, 2013, 09:46:38 AM »
I'm trying to mount two PC heatsinks into my old PS3 phat and for that to happen I need two brackets that will fit the PS3 mounting holes. Does anyone know a good fabricator/modder? All I'll need is a metal bar like aluminum with holes in the correct measurement then I'll just use bolts and nuts to hold the heatsinks in place.

I would do it myself but I do not have the proper tools :(

Slightly OT: where can one find a dremel? All they had in the DIY shop here in Eastwood were saws and drills.

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #1 on: January 14, 2013, 09:58:36 AM »
Looks like tantric is still in the modding business. Left him a message.

Online lahar

  • Member
  • **
  • Posts: 7697
Re: Looking for a modder/fabricator
« Reply #2 on: January 14, 2013, 10:01:07 AM »
Pics please when its done. I'm currently using a laptop cooler for my PS3.

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #3 on: January 14, 2013, 10:32:49 AM »
You mean you placed a laptop cooler underneath the PS3?

Online lahar

  • Member
  • **
  • Posts: 7697
Re: Looking for a modder/fabricator
« Reply #4 on: January 14, 2013, 10:35:34 AM »
^Yup. A cheap one from CDR King.

Online bravoexo

  • Member
  • **
  • Posts: 3310
  • PeopleSoft
i9-9900K, Aorus Z390 Master, Aorus RGB 32Gb DDR4-3200, GTX ASUS ROG Strix 1080 SLI, Samsung 970 M2 512Gb, Crucial MX100-512Gb SSD, Sandisk Ultra II 960Gb SSD, F1 1Tb, Sony KDL 43X8500G, GMX 2.1, Lian-Li PC-011 Air, Corsair H150i Pro, Corsair LL-120x6, Lian-Li RGB Cables, G502

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #6 on: January 14, 2013, 01:04:07 PM »
These are the stock ones that go into the back of the motherboard. I need a bracket to go on the heatsink where the screws will go into. It's that or if I get a heatsink with a wide bottom then I could probably bore a couple of holes.

Online bravoexo

  • Member
  • **
  • Posts: 3310
  • PeopleSoft
Re: Looking for a modder/fabricator
« Reply #7 on: January 14, 2013, 05:27:11 PM »
Pwede na rin pala i watercool ang PS3..


i9-9900K, Aorus Z390 Master, Aorus RGB 32Gb DDR4-3200, GTX ASUS ROG Strix 1080 SLI, Samsung 970 M2 512Gb, Crucial MX100-512Gb SSD, Sandisk Ultra II 960Gb SSD, F1 1Tb, Sony KDL 43X8500G, GMX 2.1, Lian-Li PC-011 Air, Corsair H150i Pro, Corsair LL-120x6, Lian-Li RGB Cables, G502

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #8 on: January 14, 2013, 06:13:15 PM »
May stocks ba sila? Pinagiisipan ko nga e since may radiator pa ako dito na Black Ice.

Online bravoexo

  • Member
  • **
  • Posts: 3310
  • PeopleSoft
Re: Looking for a modder/fabricator
« Reply #9 on: January 15, 2013, 03:23:33 PM »
Performance-Pcs  still have stock
i9-9900K, Aorus Z390 Master, Aorus RGB 32Gb DDR4-3200, GTX ASUS ROG Strix 1080 SLI, Samsung 970 M2 512Gb, Crucial MX100-512Gb SSD, Sandisk Ultra II 960Gb SSD, F1 1Tb, Sony KDL 43X8500G, GMX 2.1, Lian-Li PC-011 Air, Corsair H150i Pro, Corsair LL-120x6, Lian-Li RGB Cables, G502

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #10 on: January 15, 2013, 06:53:47 PM »
No response :(

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8869
  • Every end is a new beginning
    • PinoyPC
Re: Looking for a modder/fabricator
« Reply #11 on: January 25, 2013, 07:41:33 PM »
Up to now, still no response. Maybe I'll have to do it myself after all.

Offline Al

  • Administrator
  • Member
  • *
  • Posts: 3857
    • Trashcan of Thoughts
Re: Looking for a modder/fabricator
« Reply #12 on: January 26, 2013, 12:41:42 PM »
DIY!
Trashcan of Thoughts -- http://www.allibrero.com