Author Topic: Post Your Processor Overclock Here (Read 49940 times)

V46 · « **Reply #40 on:** September 16, 2006, 09:57:48 AM »

I'll let CPUz speak for me na lang....

http://valid.x86-secret.com/show_oc?id=121869

Prime 95 stable since last night....

not so expensive setup....

x2 3800+

patriot xblk dc kit

epox 9npa3 sli

task 550w psu

mindless · « **Reply #41 on:** September 16, 2006, 12:17:11 PM »

At long last validated na rin!!!

http://valid.x86-secret.com/show_oc?id=121894

aeroes · « **Reply #42 on:** September 18, 2006, 11:56:51 AM »

Gigabyte DS3
Conroe 6400
Corsair XMS 6400

zer0 · « **Reply #43 on:** September 18, 2006, 11:58:36 AM »

Quote from: aeroes on September 18, 2006, 11:56:51 AM

Gigabyte DS3
Conroe 6400
Corsair XMS 6400

wow monster fsb, ok pala talaga ang ds3

anong bios rev gamit mo?

aeroes · « **Reply #44 on:** September 18, 2006, 12:40:59 PM »

Quote from: zer0 on September 18, 2006, 11:58:36 AM

Quote from: aeroes on September 18, 2006, 11:56:51 AM
Gigabyte DS3
Conroe 6400
Corsair XMS 6400

wow monster fsb, ok pala talaga ang ds3
anong bios rev gamit mo?

F4, Im gonna try F5 soon. Im sure I can get it past 460FSB...

ccl2003 · « **Reply #45 on:** October 26, 2006, 09:46:07 PM »

Intel E6600 @ 9 x 390
ASUS P5W DH Deluxe (BIOS 1503)
2 x 1 gig OCZ DDR2800 @ DDR760 (AUTO timings)

CPU-Z validation: http://valid.x86-secret.com/show_oc?id=132939
Screenshot: http://img.photobucket.com/albums/v720/ccl2003/superpi_390fsb_102606.jpg

Heishiro · « **Reply #46 on:** October 30, 2006, 10:28:04 AM »

http://valid.x86-secret.com/show_oc?id=133815

more then 12 hours of prime95 and still cooking....

Heishiro · « **Reply #47 on:** October 30, 2006, 08:51:42 PM »

barurutor · « **Reply #48 on:** November 05, 2006, 11:37:56 AM »

http://valid.x86-secret.com/show_oc?id=135563

This ram can do 220Mhz at 1:1 divider (but @ 3-4-4-4-10-2T) but I haven't figured out exactly how to get it stable at 5:6 divider (which would set CPU FSB at 260Mhz for a speed of 2.34 Ghz) at same loose memory timings. Maxed out VDIMM supported by the BIOS (2.8v) already.

barurutor · « **Reply #49 on:** November 05, 2006, 01:51:58 PM »

hay problems with 3d apps

balik stock muna and try tweaking tonight.

hzrnbgy0 · « **Reply #50 on:** November 23, 2006, 11:39:36 AM »

A64 X2 3800+ @ 2.5GHz

Foxconn 590 SLI
FSP 700W Quad Rails
Corsair Dominator DDR2 800 C4 @ DDR2 1000 C5

Heishiro · « **Reply #51 on:** November 23, 2006, 02:11:53 PM »

Demo™ · « **Reply #52 on:** November 24, 2006, 11:12:13 PM »

e6400 at 3.6Ghz

^_^japol · « **Reply #53 on:** December 04, 2006, 05:50:12 AM »

my early morning initial test..

E6300 /DS3 / Single 1gb Geil DDR2

hopefully my mem's get replaced asap and run this good, @3ghz air i think i should be happy, since even @ stock its good enough for most games/app's

zero_jc · « **Reply #54 on:** December 04, 2006, 07:00:10 AM »

ang lulufet naman!

ako AMD Sempron 64 2600+ (ahihihi baduy, pero ayus lang malapit ko na malasap ang amd x2

theDUD3 · « **Reply #55 on:** December 04, 2006, 09:07:53 AM »

just got my core 2 duo up and going and i'm extremely satisfied with the performance. overclocking was a no-brainer, i have had a lot of experience overclocking through the years from my p3 450 way back in 1999 -> athlon thunderbird -> athlon xp barton core -> a64 3000+ & a64 3700+, and never had i experienced anything like this. right out of the box and with just changing a few bios options i got a 1ghz oc, wtf!

http://valid.x86-secret.com/show_oc?id=143484
this is just the tip of the iceberg.

the only thing i'm concerned with is that i get 50C to 55C (stock hsf) even without strenuous tasks. i removed and reseated the hsf a couple of times but i still get the same temps each time. is this normal?

my setup:
e6300
ga-965p-s3
2x512 geil ddr2-800

^_^japol · « **Reply #56 on:** December 04, 2006, 10:52:59 AM »

@thedud3

saw your post sa tpc and after that i tried it myself and luckily it worked hopefully it does fine when i have my other 1gb replaced so i can run dual chan...

we have pretty much the same setup im also getting those kind of temps... im planning to just use stock cooling heheh pwede nayun para 1:1 lang heheh... though my temps go down after i turn off orthos and do some normal stuff...

also did you notice any real difference from 1.86 to 2.8ghz? for me i really do much test but i would say no hehe...

what bios are you using? sorry dami tanong

3ghz ok nako basta stock cooling lang...

theDUD3 · « **Reply #57 on:** December 04, 2006, 11:45:09 AM »

Quote

also did you notice any real difference from 1.86 to 2.8ghz?

you wouldn't notice any performance increase when doing normal stuff, though superpi @ stock gave me 29 secs. while when bumped up to 2.8ghz i got 20secs! i also tried scanning for virus(e-trust anti-virus), spyware(ewido), watching videos(windvd7) and running photoshop and at the same time and the e6300 didn't miss a beat - loading photoshop and huge images took a while though due to the disk activity of the virus/spyware scans but once they were loaded you wouldn't notice the other programs running in the background.

Quote

what bios are you using?

F6 bios = latest non-beta bios in their website

Quote

sorry dami tanong

oks lang!

zer0 · « **Reply #58 on:** December 04, 2006, 03:50:07 PM »

@^_^japol, theDUD3

ganda combination ng components ninyo

e6300 + S3/DS3 + 2GB(dual) DDR2 800

...nag volt mod ba kayo sa processor, mobo or ram? o stock lang ang voltages?

...kung magkapera na ako ito rin ang gagawin ko na combination.

affordable + fast

...okey kaya imbis na S3 ang kukunin ko e yung asus p5b-e nalang? mas mahal ba ang p5b-e?

theDUD3 · « **Reply #59 on:** December 04, 2006, 04:19:24 PM »

Quote

...nag volt mod ba kayo sa processor, mobo or ram? o stock lang ang voltages?

all stock voltages, FSB lang pinalitan ko sa bios. hirap mag-oc. hehehe