Author Topic: P4 1.6A @ 2GHz  (Read 3950 times)

AlexG

  • Guest
P4 1.6A @ 2GHz
« Reply #20 on: May 30, 2002, 11:59:46 AM »
My Vcore is set at 1.650 (the highest allowed by the mobo), DDR Voltage is at 2.6 and my AGP at 1.6. But according to the bios I am only getting 1.568V on my Vcore. Am using Enermax EG365 (the PSU might not be supplying correct voltages).

Am using

ASmith

  • Guest
P4 1.6A @ 2GHz
« Reply #21 on: May 30, 2002, 12:03:15 PM »
hmm try the volt-mod trick to get to 1.7v
http://www.hexus.net/review.php?review=278

AlexG

  • Guest
P4 1.6A @ 2GHz
« Reply #22 on: May 31, 2002, 12:46:03 PM »
Finally got my system running @150MHz FSB, 2400MHz. Just tweaked my voltage settings, VCore @ 1.6.

Though the CPU is running a bit too hot , about 55C at idle. I did tidy up the wiring for good air flow and now am getting 52C at idle. Will try the

Offline couchpotato

  • Newbie
  • *
  • Posts: 0
P4 1.6A @ 2GHz
« Reply #23 on: May 31, 2002, 01:11:55 PM »
maingay!! anong mga SCSI drives mo pre?if you need to dispose your original hsf, PM mo ako.....

AlexG

  • Guest
P4 1.6A @ 2GHz
« Reply #24 on: May 31, 2002, 02:22:56 PM »
two 18GB Seagate Barracuda.