AMD Overclocking Guide

[X3ME15]

pag locked ang proccy.. dalawa lang mangyayari pag-tinaas or binabaan mo multi ng proccy:



1) its either there is no POST when you changed your multi from the default multi or



2) there is POST but when checked w/ CPU-Z eh lumalabas eh default multi parin.. (ive experienced it w/ Sempron proccys)

Quote

how would you know if its a palomino?

is "AthlonXP" considered palomino?

Unqoute

the answer is already been said in your statement..

[ulolin]

yung sa akin tinaas ko from 1800 to 2200 pero sabi sa bios baka maghang kapag less than 333mhz yung memory frequency.... tinaas ko hanggang 333 pero ayaw parin naghang so binalik ko sa default..... board is asus A7V8X-VX ....... :D

[ulolin]

ito nga pala yung details sa bios:



CPU speed --- manual,1800MHz, 2250 and 2700MHz

CPU frequency multiple ---- 13.5 to 20.0 kapag manual sa cpu speed

CPU External Frequency -----163/33 to 227/45

memory frequency----333

CPU Vcore----- 1.65 to 1.85



panu gagawin to? :D

[Chuck]

if I read your post right, sobrang taas na ng PCI frequency ninyo! it's at 45MHz already, from the standard 33MHz, that might be the culprit :(

[ulolin]

alin dun sir? panu ko gagawin?



bakit kaya ayaw??

[bistro]

guys, hope you bear with my simple questions:

which of these 2 will "require" you to increase vcore?
a. increasing fsb
b. increasing multiplier

is the fsb always adjustable?

adjustable ba ang fsb ng mga palominos? i have a 1800+ palomino w/ an ecs k7vta3, pero i saw in this link that the same setup was overcloced to 1.725ghz from 1.5ghz.
meron akong nakita sa cpudatabase.com
 

[dean]

guys, hope you bear with my simple questions:

which of these 2 will "require" you to increase vcore?
a. increasing fsb
b. increasing multiplier

is the fsb always adjustable?

adjustable ba ang fsb ng mga palominos? i have a 1800+ palomino w/ an ecs k7vta3, pero i saw in this link that the same setup was overcloced to 1.725ghz from 1.5ghz.
meron akong nakita sa cpudatabase.com

both a and b involve a change in the cpu clock speed.  thus, we can't say straight out which of those will need you to raise your cpu core voltage.  so what i suggest is to try raising either and/or both in small steps.  if it doesn't post, then that's when you try to raise the voltage.  fsb overclocking will be trickier since you also have to consider the fsb of your memory as a consequence of your changing your cpu fsb setting.

is the fsb always adjustable? - yes, you can adjust it with your motherboard.

adjustable ba ang fsb ng mga palominos? - the fsb of any cpu can be adjusted.  all you need is a motherboard that can adjust the fsb settings.

[bistro]

thanks dean
akala ko kasi hindi na pwede oc ang mga palominos.

=)

[Retrolock]

i dont know if its appropriate here pero semprons are new procs kasi with 166 mhz bus but slower clocks.. some older motherboards dont recognize this proc. they will still think its a t-bred hence they assign 133 mhz bus.

so its essential to update your bios. So you can overclock properly.

(wehehehe feeling marunong)

[spoliarium]

Athlon 64 overclocking guide and principle:
http://www.neoseeker.com/Articles/Hardware...owto/index.html
http://www.dfi-street.com/forum/showthread...46&page=1&pp=15
http://www.neoseeker.com/Articles/Hardware...n64oc/index.htm => enlightening article

AMD Athlon 64 Motherboard BIOS Settings:
http://www.aoaforums.com/frontpage/index.p...=1&limitstart=2

[shadow.dweller]

guys i want to start overclocking my pc...ito specs ko..sorry kung medyo hindi 'hi-end'. kaya ba to i-overclock? ano kailangan kong applications?

AMD Athlon XP 2500+ 1.84GHZ

Coolermaster Aero 7+

Epox EP-8RDA+ Pro nForce2 (Socket A)

2 x 40 GB Seagate 7200rpm

2 x 256MB DDR 400 PQI

GeForce FX 5700LE 128MB

[spoliarium]

Set mo multipliers mo sa x11 at FSB at 200 MHz, instant 2500@3200 iyan kung Barton ang proc mo.  Check mo lang temperatures later when overclocked, malamang above 50C iyan.

[shadow.dweller]

@spoliarium
sir how would i know if barton un proc ko and how do i change does values sa bios ba o may ibang application pa ako kailangan i download? what can i use to check my temp. sori po la talaga kc ako alam sa overclocking pasencya po...  

[spoliarium]

Download cpu-z to check if your proc is a Barton.

Check this link for a guide:  http://www.madshrimps.be/?action=gethowto&...=112&howtoID=43

[gizmic]

2500+ only comes in barton flavours

[shadow.dweller]

i used cpu-z and it is a barton, i read the article and it told be to use this to check for stability "Sandra CPU Burn-in & 3DMark 2k1" i found and dl'd 3dmark2001 but i can't find the Sandra CPU Burn in...i downloaded sandra lite 2005 and with it came a burn in wizard..will that do ok?

[shadow.dweller]

@spolarium
sir salamat sa link, barton ung proc ko abd i want to overclock it. i read the article and it told me to use 3D2k1 and Sandra CPU Burn-In. i now have 3D2k1 installed pero i only found Sandra Lite 2005 which has a Burn-In wizard, pwede ko ba rin un gamitin? and sir ano gamit ninyo to check your temp?  

[spoliarium]

Get motheboard monitor 5:  http://mbm.livewiredev.com/download.html

Subukan mo iyon burn-in wizard ng Sandra.  You can also download Prime95:  http://www.mersenne.org/freesoft.htm to test stability of your overclock.

[gizmic]

in sandra you click CPU arithmetic Benchmark to run the cpu burn in

since you have 400mhz of ram the normal 200X11 will be easy i dont think youre temps will go over 50C

i used to have a similar set up and i didn't need to bump up the vcore  

[shadow.dweller]

@gizmic
before mo inOC ung rig ano ung temp ng case paT ng cpu pag idle?