PinoyPC Forums

Technical Discussions => Networking/Web => Topic started by: Taggy on June 01, 2018, 03:49:37 PM

Title: adminpldt error.
Post by: Taggy on June 01, 2018, 03:49:37 PM
I was trying to change the password of my wifi.. only to find out adminpldt password error. Thank you this link help me alot

https://isensey.com/192-168-1-1-adminpldt-login-error-accessing-active-clients-list/ (https://isensey.com/192-168-1-1-adminpldt-login-error-accessing-active-clients-list/)
The password 1234567890 doesnt work anymore.
Eto na bago admin 1234..

The new process I think is better.  check it out
Title: Re: adminpldt error.
Post by: friendlyfire on June 04, 2018, 03:26:05 PM
yeah, they changed admin password. you need  to call tech for router password.  new policy
Title: Re: adminpldt error.
Post by: Capcom on June 07, 2018, 01:56:05 AM
the admin 1234 only gives basic settings ,i had to file a ticket for it to get activated.. needed it for port mapping at dns forwarning
Title: Re: adminpldt error.
Post by: Capcom on June 07, 2018, 10:30:23 PM
btw you should put

http://192.168.1.1/fh

to be able to use the adminpldt account
Title: Re: adminpldt error.
Post by: motion55 on November 24, 2018, 05:10:47 PM
Black Friday special:

The adminpldt account was locked out after the newest firmware updates on fiberhome ONUs from PLDT. But you can unlock the adminpldt account using the fiberhomesuperadmin account.

(https://www.mediafire.com/convkey/93cb/lujd201x9ib40uy4g.jpg) (http://www.mediafire.com/view/lujd201x9ib40uy/PLDT_login.png/file)
Title: Re: adminpldt error.
Post by: splerdu on November 24, 2018, 06:26:11 PM
^ which option?
Title: Re: adminpldt error.
Post by: motion55 on November 24, 2018, 07:09:20 PM

Select Web Admin Switch enable radio and press the apply button. Log out and re-login again to


 http://192.168.1.1/fh (http://192.168.1.1/fh)


Unless you had previously changed the password, the default adminpldt password is


6GFJdY4aAuUKJjdtSn7dC2x



(https://www.mediafire.com/convkey/ac30/fvqsaq3bfbq4urz4g.jpg) (http://www.mediafire.com/view/fvqsaq3bfbq4urz/Annotation2.png/file)
Telnet is another powerful option but that's another story.
Title: Re: adminpldt error.
Post by: splerdu on November 25, 2018, 12:04:00 AM
Thanks! telnet would be sweet! No leak for the root password?
Title: Re: adminpldt error.
Post by: motion55 on November 25, 2018, 05:00:24 AM
For telnet it's just gpon/gpon or gepon/gepon username/password to log in. The list or help commands will give you the list of available commands. Typing enable command will enable admin commands. Use the same password you logged in with to enable. Again, list will help you in a given context.
The super admin account applies to all fiberhome AN5506 ONUs as far as I can tell. Also adminpldt remains unlocked until the modem is rebooted and reregisters with the OLT. If you sign a waiver, pldt might grant you adminpldt access or simply switch your modem to bridged mode.
Title: Re: adminpldt error.
Post by: jeremypv on November 25, 2018, 05:10:08 AM
my ONU was recently upgraded to RP2627, this worked for me, thanks!
Title: Re: adminpldt error.
Post by: splerdu on September 26, 2019, 01:59:25 PM
Current username and password for fiberhomesuperadmin:

f~i!b@e#r$h%o^m*esuperadmin
s(f)u_h+g|u