PinoyPC Forums

Technical Discussions => Hardware => Topic started by: geode on June 04, 2002, 02:19:08 AM

Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 04, 2002, 02:19:08 AM
Already called up some shops re the availability (ie villman, pcx, rsun, pco).  All they have are the malaysian ones.  nasa Phil na nga tayo wala pa yung sariling atin dito :(

Any auggestions?

btw, for those asking y i'm looking for one well
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: ASmith on June 04, 2002, 05:50:07 AM
uh malaysians are much hotter than the costa ricans. try getting the costa ricans if you can't find the philippine made ones. i've got one and it overclocks easy =). take not mine pack. date on mine is 01/31/2002 ! pretty old !
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: chaos on June 04, 2002, 06:37:25 AM
geode.. most malaysain P4 1.6As can easily run at 133Mhz FSB without any problems.. I guess most of them can run at 150Mhz FSB  ~ 2.4Ghz.  Unless you want to go higher than that... stick with the philippines one..
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: ASmith on June 04, 2002, 08:22:46 AM
actually those malaysians run hotter
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 04, 2002, 11:26:42 AM
thanks for the replies pero parang na misread ung post ko.  i'm actually looking for Philippine P4 1.6A's.

ASmith,

where did you get your costa ricans?  just in case i can't find a phil P4.

chaos,

do you have a phil P4?  where
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: chaos on June 04, 2002, 12:40:22 PM
no, I have a malaysian P4.  I was able to run it as high as 150Mhz ~ 2.4Ghz... my memory sticks conked out anything  higher than that.. =(
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 04, 2002, 12:43:41 PM
what mem sticks did u use?  i'm planning to get either an apacer ddr 2100 (nice reviews) or a kingmax ddr 2700 (nice recommendations from fellow ppc'ers).
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: couchpotato on June 04, 2002, 02:21:13 PM
ako meron Pentium 4 1.6a Philippines, heeheh...minsan, napag boot ko siya sa 173 fsb......2.768ghz siya, hehehe, curiuos lang ako kung hanggang san siya mag post.....pero heto, stable at 160....2.56ghz...on Tt boy's Volcano 7+, wahehehe.

mahirap ma
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: ASmith on June 04, 2002, 08:59:18 PM
geode, get the kingmaxes. found it in dynamic pc, they only have malaysian made p4s now
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: chaos on June 04, 2002, 09:47:52 PM
I have a Micron PC2100 and another one with Elixir chips.  Both can run up to 150Mhz at default voltage.  jagc1 tested these sticks and he was able to make it run at 165Mhz at 2.9v.  unfortunately for me, my motherboard doesn't have mem voltage adjustment
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 04, 2002, 10:08:48 PM
couchpotato,

ininggit mo naman ako e :)  san mo natsambahan yan?  i've called up the various shops na here in manila pero alaws luck.  baka  wala na silang stock.  btw, tt 7+ din yung balak kong gamiting HSF.

chaos, ASmith,

i'll keep
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: incubus on June 05, 2002, 12:05:00 AM
Hey Guyz...i've once work at Cypress Phil a subcon of intel philippines....and i say most intel products made in the phil or being subcontracted...are processors for U.S. Military...example the F22 raptor jet...it uses chips made in phil....but with regar
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: pums on June 05, 2002, 12:11:34 AM
Quote
no, I have a malaysian P4. I was able to run it as high as 150Mhz ~ 2.4Ghz... my memory sticks conked out anything higher than that..


chaos, anong temp ng malaysian P4 mo? (idle and full load) tsaka ano pala gamit mong mobo?
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: rumble on June 05, 2002, 12:13:27 AM
OT: i have seen samsung DDR333 at pc options last week, try nyo kung meron pa.
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: ASmith on June 05, 2002, 01:08:37 AM
bad trip sa pc options you can only buy ddr memory from them kung may kasamang mobo
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: chaos on June 05, 2002, 01:17:20 AM
my motherboard is a Jetway S446 SiS 645 chipset.  at 2.4Ghz and 1.75v my idle temps goes between 42 to 45degrees.. at full load, between 50 to 55 degrees.

but I don't really run my rig at 2.4Ghz. pci bus is too high at 150Mhz.  I normally run it at
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: jaydee on June 05, 2002, 01:18:33 AM
and you can only buy MOBOs ata pag may kasamang CPU...
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: rumble on June 05, 2002, 01:36:33 AM
asmith,jaydee
you're both right! well sabi nila limited lang daw ang stocks nila.

kaya nga ako i'm waiting for my brother to buy a new proc+mobo combo, para makakuha ng DDR333 sa kanila:-).

Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: Jabongga on June 05, 2002, 02:27:56 AM
Quote
kaya nga ako i'm waiting for my brother to buy a new proc+mobo combo, para makakuha ng DDR333 sa kanila:-).


OT: Try Rising Sun!
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: BaThMaN on June 05, 2002, 02:32:19 AM
OT: magkano DD333 sa PCO, what brand and magkano???
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: rumble on June 05, 2002, 03:40:11 AM
Quote
OT: Try Rising Sun!


OT: wala yata silang samsung dun eh.

Quote
OT: magkano DD333 sa PCO, what brand and magkano???


OT:I think 3700 yung 256mb pero SAMSUNG chipset.

Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: MV on June 05, 2002, 09:18:34 AM
meron na sa PCX. samsung ddr333. php3400 for 256mb...
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 05, 2002, 11:35:38 AM
OT: thanks MV, will check tomorrow if these are the OEM Samsungs and I've read that some of these are also single sided (good to max out the DIMM slots kung may pera pang bili)


Edited by dulber on 6/5/2002 11:42:14 PM
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 05, 2002, 11:36:19 AM
Most likely i'll settle for the malaysian P4's ... mukhang mahirap talagang maghanap ng Philippine P4's
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 05, 2002, 11:46:09 AM
Geode, Wait! Wait!  do a search on the board for P4 1.6. I remember someone getting a chip with a box labeled made in Malaysia and getting a chip from Phils.  He posted the phoen number of the shop in Paranaque.  I'm also starting to build a P4 based syst
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 05, 2002, 12:05:59 PM
the post was from wickwire:

The store is PC Unlimited... it's along sucat tel # 8267752. Mabait yung owner he mingles with customers. They have Lian Lis there and the PC 65 is 6,800 (order basis). Available P4 1.6As are from all three 'factories' (
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 05, 2002, 12:30:44 PM
dulber,

thanks for that, actually i scanned muna yung boards pero sa dami ng posts about the P4 1.6A i think i overlooked that.  thanks uli.

Quote
what mobo will you be using, if you don't mind?


Am thinking of getting either
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 05, 2002, 12:55:41 PM
Same specs as I'm planning on getting pero ima-migrate ko lang existing optical drives ko, still want a Zalman fan, though, and the friend I have in the US is coming home without it =(

P4 1.6A (might get one from wickwires supplier kung meron Phil
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 05, 2002, 01:50:33 PM
onga almost the same specs.  have u called pcunlimited na ba?  pwede kaya magreserve dun?  kung sino mauna satin tumawag pwede magreserve ng isa pa?  yung iCute 627 (1900 din sa rsun) model mukhang paubos na, dapat ata makabisita na sa pcx.

i'm bui
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: wickwire on June 05, 2002, 11:21:44 PM
geode and dulber,

Of course you can always get the 1.8A pag ubos na 1.6A's he has the Phil made ones too :)
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 06, 2002, 12:13:15 AM
just called PC Unlimited and they told me na ubos na daw yung Phil made P4's 1.6A's!!!  Bukod dun, nagtaas na sila ng price, 7,600 na daw yung P4 1.6a's!  Arghh
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 06, 2002, 03:43:01 AM
Ang layo naman ng itinaas ng presyo.  Magkano kasy yung 1.8A?  Teka makatawag na din nga.
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: eprom on June 06, 2002, 04:24:56 AM
geode

p4 1.6A made in the philippines? are you after the place of packaging of the chip? I think they are all the same, intel philippines and malaysia are just packaging they don't have cleanroom fabs to produce the microprocessors? I was just wond
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 06, 2002, 05:27:50 AM
it says in the box na "manufactured in malayasia".   so i guess it's manufactured and not just packaged.

as for the difference between the two, most post i read said na phil northwoods are better than malaysian ones (ie temp increase, oclockability
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: BaThMaN on June 06, 2002, 07:59:29 AM
err wait! yung local supplier namin dito may Phil made P4 1.6a. PM if you're interested.

Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: djackal on June 06, 2002, 09:58:39 AM
saan ba nakakabili ng 256MB DDR333 na crucial?
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: chaos on June 06, 2002, 11:27:14 AM
umm.. djackal.. medyo off topic tayo pre.. create ka na lang ng bagong thread..
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: djackal on June 06, 2002, 10:33:55 PM
chaos, oo nga. sorry:)
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 07, 2002, 04:42:45 AM
geode,

1.6A7,499  Malaysian
1.8A 9,299
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 07, 2002, 04:47:51 AM
geode,

1.6A   7,499  Malaysian lang daw pero kung kukulitin natin baka maihanap tayo ng Philippine made.
1.8A   9,299
2.0A   11.499

you have to ask Ricky when calling Sunvar, he knows the available items more.
nung si maricel pa, t
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 07, 2002, 05:53:41 AM
dulber,

that's good news!  sana meron ... hayaan mo at kukulitin k din yang si ricky (sigh sana girl para mas ganahan akong mangulit!  he he he)

sa rising sun naman they have the malyasian lang pero they'll give the 3-year warranty for the p
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: eprom on June 07, 2002, 06:11:03 AM
geode

thanks for the input, nalinawan na ako sa sinabi mo between made in malaysia and philippines, I guess the P4s that were packaged from the philippines are better.....just an info for you, they are not totally manufactured in malaysia nor in t
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 07, 2002, 06:30:36 AM
eprom,

http://iisd.ca/susprod/semiconduct.pdf (http://iisd.ca/susprod/semiconduct.pdf)

The Philippines (like malaysia and costa rica) merely assemble (i guess this is where they got the "made in the Philippines thing") and test the products.
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dulber on June 07, 2002, 07:52:40 AM
Yung nga sana meron sa Villman nung Phils. made at ng may silbi naman yung almost 200 na price difference sa rsun. Pareho lang warranty length with Villman an registered IASP das sila ng Intel.

Ayaw mo bang hintayin yung Leadtek GF4 Ti4200?  Ako ha
Title: P4 1.6A Phil manufactured hard to find!!! :(
Post by: geode on June 07, 2002, 11:07:11 AM
That was one of the cards i considered pero P7,900 yung Inno3D GF4 Ti4200 64Mb ddr sa PCX.  Medyo namamahalan ako sa ngayon.  buong system kasi bubuuin ko and right now the total projected damage is between 37k-40k wala pa dyan yung price ng monitor at so
Title: Re: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dean on June 10, 2018, 08:27:59 PM
i think my 1.6A was from the philippines but i never really got to overclock it
Title: Re: P4 1.6A Phil manufactured hard to find!!! :(
Post by: dom_08 on June 17, 2018, 10:35:54 AM
That was one of the cards i considered pero P7,900 yung Inno3D GF4 Ti4200 64Mb ddr sa PCX.  Medyo namamahalan ako sa ngayon.  buong system kasi bubuuin ko and right now the total projected damage is between 37k-40k wala pa dyan yung price ng monitor at so

ang mura ng computer dati. -_-