Author Topic: AMD Overclocking Guide (Read 33581 times)

zer0 · « **Reply #40 on:** May 03, 2005, 11:48:02 PM »

guys, patulong naman how to overclock my system...

athlonxp 2600+ barton @2.08ghz
MSI kn2delta
kingmax ddr400 1gig total

shadow.dweller · « **Reply #41 on:** May 04, 2005, 12:00:13 AM »

@zero1978
asking for the same advice follow spoliarium's link:

AMD OC guide

ako athlon 2500+ @1.84Ghz planning to overclock it to 3200 kung kaya...
ano temp ng case and cpu mo?

zer0 · « **Reply #42 on:** May 04, 2005, 12:17:13 AM »

...high performance settings ngayon sa bios ko
...2.5 3 3 7 ata ang mem timings
ang fsb 166 parin...

temps ko ngayon idle is 49-50c... load 58-60c (farcry 1.3)

wla kasing core cell ang k7n2 delta l ko e... kaya naguguluhan pa ako mag overclock ng processor...

shadow.dweller · « **Reply #43 on:** May 04, 2005, 12:53:46 AM »

para magstart sana ako to oC my rig a bit pero bat wala sa bios ko ang softmenu II/III paano ko man to machange ung multiplier niya?

gizmic · « **Reply #44 on:** May 04, 2005, 01:28:01 AM »

on my old barton its 40-50C in summer time and 35-45C in good temps

shadow.dweller · « **Reply #45 on:** May 04, 2005, 01:51:56 AM »

@gizmic
ano cooling system mo? how come wala sa bios ko ang softmenuII/III

gizmic · « **Reply #46 on:** May 04, 2005, 02:07:20 AM »

i use a Aero 7+

i'm not sure what are you talking about you....

different boards have different names for its overclocking menu in bios just try to find it or maybe take screen shots of them

shadow.dweller · « **Reply #47 on:** May 04, 2005, 09:42:38 AM »

i downloaded Clockgen, is that advisable to use?

shadow.dweller · « **Reply #48 on:** May 06, 2005, 10:37:48 PM »

guys i have a 2500+ barton on a EP-8RDA3+ i can't fins a decent guide...all they they is that they increased the multipliers pero i can't with my mobo kasi wala siya softmenu sa BIOS ok lang ba gumamit ng clock gen?

gizmic · « **Reply #49 on:** May 09, 2005, 04:11:53 AM »

your board's overclocking menu in bios is the "Advance Chipset Features" and then for voltages its in the "Power BIOS Features"

and i dont advice overclocking in windows

DylanJames · « **Reply #50 on:** May 09, 2005, 04:20:11 AM »

overclock in bios as much as possible.

where do you exactly have difficulty in overclocking?

gizmic · « **Reply #51 on:** May 09, 2005, 04:41:46 AM »

well as far i can see things going for him he can't seem to find the menu lol

and yes your board has multiplier settings

shadow.dweller · « **Reply #52 on:** May 09, 2005, 01:02:29 PM »

im really new to this but i really want to try it out...

difficulty: i don't know what values to alter. kc alam ko dapat ung multipliers eh wala naman sa Advance Chipset Features, ang fsb values lang ba akong gagalawin? pati mga tol meron ba kayo steps na pwede kong sundan...para mas claro...thanks talaga sori sir gizmic kung sobrang newbie mga tanong ko...

gizmic · « **Reply #53 on:** May 09, 2005, 02:01:10 PM »

dont worry i was a newbie at a time

multiplier in your bios should be called "CPU Clock Ratio"

btu since your cpu is a 2500+ why dont you try the standard 2500+ to 3200+ overclock which is done but changing the fsb to 200

in overclocking its trial and error and always bit by bit dont rush things because you need to test the system if its stable that those speeds like play a game or something run some benchmarks would do

if you system isn't stable it means it needs more vcore

shadow.dweller · « **Reply #54 on:** May 09, 2005, 06:17:03 PM »

i have prime95 and sandra lite would that be enough to stable test my rig? fsb to 200 and thats it? wala ako muna galawin sa voltage o AGP or anything? ung fsb lang to 200? tnx bro for understanding....

gizmic · « **Reply #55 on:** May 09, 2005, 06:36:41 PM »

yes see if you rig can run stable in 200fsb remember to make your ram also run 200 (1:1 ratio)

if it crashes in games or test feel free to increase your vcore abit

shadow.dweller · « **Reply #56 on:** May 12, 2005, 12:53:52 PM »

@gizmic
sir if ever you go online please help me out! i did what you said i raised the fsb to 200. you also told me that the ram should run on 200mhz too so i looked through the bios and the only thing in mhz with related to memory is the 'memory frequency' and when i changed my fsb from 166 to 200 the mem freq automatically changed too. my pc restarted, it told me to wait and it restarted again but this time everything i see is a black screen and thats it...kahit ung POST screen wala, kahit ung display ng vid card info rin...i checked the digital clock on my board which will inform you which error it is and it displays C3 which means its a problem with the memory. refering to my manual it states that it is either 1.compatibility issue of memory 2.wrong insertion of memory or 3. damaged memory... since it worked fine before i OC'd it, then it could only mean item number 3...is there anything i can do to fix this without buying new memory modules?

gizmic · « **Reply #57 on:** May 12, 2005, 01:43:54 PM »

check your manual and look for Clear Cmos its to restart your bios to default either by putting a jumper or by taking off your cmos battery on the board dont worry your ram is ok since its a pqi 400mhz(200fsb) your parts are capable of running it at those speeds unless your specs are fake lol btu i dont think so anyway just clear cmos and tell me how it goes

now we know it cant post so you only need more voltage its either the ram volts or the cpu volts

theDUD3 · « **Reply #58 on:** May 12, 2005, 01:46:59 PM »

@shadow

you should've loosened your memory timings before you set your fsb to 200... first thing to do is to reset your cmos/bios to default, then start overclocking bit by bit. =)

tomodachi_jaded · « **Reply #59 on:** May 14, 2005, 11:24:15 PM »

sir's can anyone guide me in overclocking my amd sempron 2400+ ? hehe I want to try if sempron can be oveclocked to its fullest :-)