PinoyPC Forums

Technical Discussions => Overclocking/Modding => Topic started by: CoreXP on August 08, 2003, 11:34:32 PM

Title: AMD Overclocking Guide
Post by: CoreXP on August 08, 2003, 11:34:32 PM
http://home.earthlink.net/~deeppow/OC_Guide/Mem_Mobo_CPU_Overclocking_Guide.htm (http://home.earthlink.net/~deeppow/OC_Guide/Mem_Mobo_CPU_Overclocking_Guide.htm)
Title: AMD Overclocking Guide
Post by: blahz on August 08, 2003, 11:46:21 PM
Usefull information :)
Title: AMD Overclocking Guide
Post by: JC on August 09, 2003, 07:49:44 AM
nice!
Title: AMD Overclocking Guide
Post by: spolarium on August 09, 2003, 08:19:02 AM
Informative.
Title: AMD Overclocking Guide
Post by: verk on August 15, 2003, 01:24:31 PM
page unavailable.
Title: AMD Overclocking Guide
Post by: vic on August 20, 2003, 10:14:37 PM
page unavailable.



OO nga........=(
Title: AMD Overclocking Guide
Post by: jpadua on August 23, 2003, 09:00:01 AM
guys eto baka stupid question heheheh pasensya na... paano ko malalaman kung unlocked yung Proc ko? naka AMD AthlonXP 2000 ako... sa mobo ko I can only adjust the FSB.. di ko alam kung dahil walang provision ang mobo ko or naka lock lang ang CPU multiplier ko.  BTW my mobo is an ECS K3VTA333... SalamaT!
Title: AMD Overclocking Guide
Post by: alikishi on August 23, 2003, 09:04:24 AM
Quote
guys eto baka stupid question heheheh pasensya na... paano ko malalaman kung unlocked yung Proc ko? naka AMD AthlonXP 2000 ako... sa mobo ko I can only adjust the FSB.. di ko alam kung dahil walang provision ang mobo ko or naka lock lang ang CPU multiplier ko. BTW my mobo is an ECS K3VTA333... SalamaT!




unang una, wala atang provision para mapalitan ang multipliers ng processor mo through the bios.  So we can't say kung unlocked din yung processor mo.  Although if your processor is a palomino, most probably hindi pa siya unlocked.  if thoroughbred and barton siya, then most probably unlocked siya
Title: AMD Overclocking Guide
Post by: munkhee on August 27, 2003, 11:27:36 AM
how would you know if its a palomino?

is "AthlonXP" considered palomino?
Title: AMD Overclocking Guide
Post by: dean on August 27, 2003, 11:30:37 AM
look at the stepping of your cpu and you'll know if your Athlon XP is a palomino or a thoroughbred A or B or a Barton.
Title: AMD Overclocking Guide
Post by: toyee on August 27, 2003, 11:41:40 AM
munkhee,

 

you can try this :



         http://www.overclockers.com/tips00173/
Title: AMD Overclocking Guide
Post by: abtp on September 11, 2003, 12:39:28 AM
CoreXP's link gives the following message:

Quote
The location of Memory Motherboard CPU Overclocking Guide has moved. You will not be automatically forwarded and will need to manually enter the following address into your browser:



http://www.deep-powder.net/OC_Guide/Mem_Mobo_CPU_Overclocking_Guide.htm



This will be the new home of the guide if you wish to bookmark it.





coyping/pasting the new link leads nowhere...
Title: AMD Overclocking Guide
Post by: gratchie on November 26, 2003, 01:57:15 PM
oo nga.... wala bang updated guide?
Title: AMD Overclocking Guide
Post by: wool on April 21, 2004, 02:43:47 AM
no more overclocking guide?
Title: AMD Overclocking Guide
Post by: toyee on April 22, 2004, 06:22:47 PM
Quote
Here is the new interactive painting guide for T-Bred and Barton cores, which additional shows how to change a T-Bred or a Barton into a mobile CPU. You've surely heard of the difficulties in doing that, due to the latest multiplier lock of AMD. With a slight modification in the L5 bridge it is possible to change the CPU into a mobile one which is overclockable by software. (The first mainboards are supporting this function and some tools like e.g. CPUMSR supports most mainboard chipsets). But multiplier and Vcore settings on mobile CPUs needs different bridge connections, so this is the reason for this brand-new interactive painting guide.




http://www.ocinside.de/go_e.html?/html/workshop/socketa/tbred_painting.html (http://www.ocinside.de/go_e.html?/html/workshop/socketa/tbred_painting.html)
Title: AMD Overclocking Guide
Post by: jepoi on June 29, 2004, 02:42:29 PM
i got a question na matagal ko nang gustong itanong.  it's about the pci/agp lock feature of a motherboard.



what does it do?



ang alam ko lang kase, if you're overclocking, it is better if your mb has this.  pero hindi ko alam kung bakit or kung para saan.
Title: AMD Overclocking Guide
Post by: streamwaredev on June 29, 2004, 03:06:08 PM
jepoi: if your motherboard has no agp/pci clock, when you increase the FSB, the AGP and PCI clocks also increase. For example, if your FSB is 133 and you increase it to 150, your AGP clock (stock 133/2 = 66.7) will increase to 75. Your PCI clock (stock 133/4 = 33.3) will increase to 37.5.



AGP and PCI cards may not be able to handle the increased speed, and result in failures or glitches. If your motherboard HAS an AGP/PCI clock, the AGP bus stays at 66 and the PCI bus stays at 33 no matter what you speed your FSB is.



Hope this information helps you.
Title: AMD Overclocking Guide
Post by: ulolin on October 21, 2004, 05:49:47 PM
sa akin 1.8ghz pero accoding sa bios pede ata increase to.... pero ito tanong pag-increase ko ba yung clock eh okay lang a yung fan ng cpu ko.... processor eh thermaltake and sa casing naman 2 exhaust tapos isang intake ata.... :D
Title: AMD Overclocking Guide
Post by: neonhyde on October 22, 2004, 05:03:12 PM
http://www.deep-powder.net/OC_Guide/Mem_Mobo_CPU_Overclocking_Guide.htm



new link
Title: AMD Overclocking Guide
Post by: dead_rabbit on October 25, 2004, 01:14:54 PM
Just download CPU-Z it eventually displays the core type of your CPU.





Quote

how would you know if its a palomino?

is "AthlonXP" considered palomino?

Unqoute
Title: AMD Overclocking Guide
Post by: X3ME15 on October 25, 2004, 06:14:21 PM
pag locked ang proccy.. dalawa lang mangyayari pag-tinaas or binabaan mo multi ng proccy:



1) its either there is no POST when you changed your multi from the default multi or



2) there is POST but when checked w/ CPU-Z eh lumalabas eh default multi parin.. (ive experienced it w/ Sempron proccys)



Quote
Quote

how would you know if its a palomino?

is "AthlonXP" considered palomino?

Unqoute




the answer is already been said in your statement..
Title: AMD Overclocking Guide
Post by: ulolin on October 31, 2004, 09:49:17 PM
yung sa akin tinaas ko from 1800 to 2200 pero sabi sa bios baka maghang kapag less than 333mhz yung memory frequency.... tinaas ko hanggang 333 pero ayaw parin naghang so binalik ko sa default..... board is asus A7V8X-VX ....... :D
Title: AMD Overclocking Guide
Post by: ulolin on October 31, 2004, 10:31:02 PM
ito nga pala yung details sa bios:



CPU speed --- manual,1800MHz, 2250 and 2700MHz

CPU frequency multiple ---- 13.5 to 20.0 kapag manual sa cpu speed

CPU External Frequency -----163/33 to 227/45

memory frequency----333

CPU Vcore----- 1.65 to 1.85



panu gagawin to? :D
Title: AMD Overclocking Guide
Post by: Chuck on November 01, 2004, 01:30:50 AM
if I read your post right, sobrang taas na ng PCI frequency ninyo! it's at 45MHz already, from the standard 33MHz, that might be the culprit :(
Title: AMD Overclocking Guide
Post by: ulolin on November 01, 2004, 09:57:15 AM
alin dun sir? panu ko gagawin?



bakit kaya ayaw??
Title: AMD Overclocking Guide
Post by: bistro on January 20, 2005, 04:44:28 PM
guys, hope you bear with my simple questions:

which of these 2 will "require" you to increase vcore?
a. increasing fsb
b. increasing multiplier

is the fsb always adjustable?

adjustable ba ang fsb ng mga palominos? i have a 1800+ palomino w/ an ecs k7vta3, pero i saw in this link that the same setup was overcloced to 1.725ghz from 1.5ghz.
meron akong nakita sa cpudatabase.com
 
Title: AMD Overclocking Guide
Post by: dean on January 21, 2005, 01:22:25 AM
Quote
guys, hope you bear with my simple questions:

which of these 2 will "require" you to increase vcore?
a. increasing fsb
b. increasing multiplier

is the fsb always adjustable?

adjustable ba ang fsb ng mga palominos? i have a 1800+ palomino w/ an ecs k7vta3, pero i saw in this link that the same setup was overcloced to 1.725ghz from 1.5ghz.
meron akong nakita sa cpudatabase.com
both a and b involve a change in the cpu clock speed.  thus, we can't say straight out which of those will need you to raise your cpu core voltage.  so what i suggest is to try raising either and/or both in small steps.  if it doesn't post, then that's when you try to raise the voltage.  fsb overclocking will be trickier since you also have to consider the fsb of your memory as a consequence of your changing your cpu fsb setting.

is the fsb always adjustable? - yes, you can adjust it with your motherboard.

adjustable ba ang fsb ng mga palominos? - the fsb of any cpu can be adjusted.  all you need is a motherboard that can adjust the fsb settings.
Title: AMD Overclocking Guide
Post by: bistro on January 22, 2005, 04:37:16 AM
thanks dean
akala ko kasi hindi na pwede oc ang mga palominos.

=)
Title: AMD Overclocking Guide
Post by: Retrolock on January 29, 2005, 01:44:56 AM
i dont know if its appropriate here pero semprons are new procs kasi with 166 mhz bus but slower clocks.. some older motherboards dont recognize this proc. they will still think its a t-bred hence they assign 133 mhz bus.

so its essential to update your bios. So you can overclock properly.

(wehehehe feeling marunong)
Title: AMD Overclocking Guide
Post by: spoliarium on April 23, 2005, 03:26:30 AM
Athlon 64 overclocking guide and principle:
http://www.neoseeker.com/Articles/Hardware...owto/index.html (http://www.neoseeker.com/Articles/Hardware/Guides/a64ochowto/index.html)
http://www.dfi-street.com/forum/showthread...46&page=1&pp=15 (http://www.dfi-street.com/forum/showthread.php?t=3846&page=1&pp=15)
http://www.neoseeker.com/Articles/Hardware...n64oc/index.htm (http://www.neoseeker.com/Articles/Hardware/Guides/athlon64oc/index.htm) => enlightening article

AMD Athlon 64 Motherboard BIOS Settings:
http://www.aoaforums.com/frontpage/index.p...=1&limitstart=2 (http://www.aoaforums.com/frontpage/index.php?option=content&task=view&id=245&Itemid=0&limit=1&limitstart=2)
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 02, 2005, 09:18:29 PM
guys i want to start overclocking my pc...ito specs ko..sorry kung medyo hindi 'hi-end'. kaya ba to i-overclock? ano kailangan kong applications?

AMD Athlon XP 2500+ 1.84GHZ

Coolermaster Aero 7+

Epox EP-8RDA+ Pro nForce2 (Socket A)

2 x 40 GB Seagate 7200rpm

2 x 256MB DDR 400 PQI

GeForce FX 5700LE 128MB
Title: AMD Overclocking Guide
Post by: spoliarium on May 02, 2005, 09:26:02 PM
Set mo multipliers mo sa x11 at FSB at 200 MHz, instant 2500@3200 iyan kung Barton ang proc mo.  Check mo lang temperatures later when overclocked, malamang above 50C iyan.
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 02, 2005, 09:47:07 PM
@spoliarium
sir how would i know if barton un proc ko and how do i change does values sa bios ba o may ibang application pa ako kailangan i download? what can i use to check my temp. sori po la talaga kc ako alam sa overclocking pasencya po...  
Title: AMD Overclocking Guide
Post by: spoliarium on May 02, 2005, 11:40:53 PM
Download cpu-z to check if your proc is a Barton.

Check this link for a guide:  http://www.madshrimps.be/?action=gethowto&...=112&howtoID=43 (http://www.madshrimps.be/?action=gethowto&number=1&howtopage=112&howtoID=43)
Title: AMD Overclocking Guide
Post by: gizmic on May 03, 2005, 12:12:55 AM
2500+ only comes in barton flavours
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 03, 2005, 12:49:05 AM
i used cpu-z and it is a barton, i read the article and it told be to use this to check for stability "Sandra CPU Burn-in & 3DMark 2k1" i found and dl'd 3dmark2001 but i can't find the Sandra CPU Burn in...i downloaded sandra lite 2005 and with it came a burn in wizard..will that do ok?
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 03, 2005, 08:45:04 AM
@spolarium
sir salamat sa link, barton ung proc ko abd i want to overclock it. i read the article and it told me to use 3D2k1 and Sandra CPU Burn-In. i now have 3D2k1 installed pero i only found Sandra Lite 2005 which has a Burn-In wizard, pwede ko ba rin un gamitin? and sir ano gamit ninyo to check your temp?  
Title: AMD Overclocking Guide
Post by: spoliarium on May 03, 2005, 09:59:39 AM
Get motheboard monitor 5:  http://mbm.livewiredev.com/download.html (http://mbm.livewiredev.com/download.html)

Subukan mo iyon burn-in wizard ng Sandra.  You can also download Prime95:  http://www.mersenne.org/freesoft.htm (http://www.mersenne.org/freesoft.htm) to test stability of your overclock.
Title: AMD Overclocking Guide
Post by: gizmic on May 03, 2005, 01:45:58 PM
in sandra you click CPU arithmetic Benchmark to run the cpu burn in

since you have 400mhz of ram the normal 200X11 will be easy i dont think youre temps will go over 50C

i used to have a similar set up and i didn't need to bump up the vcore  
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 03, 2005, 10:06:37 PM
@gizmic
before mo inOC ung rig ano ung temp ng case paT ng cpu pag idle?  
Title: AMD Overclocking Guide
Post by: zer0 on May 03, 2005, 11:48:02 PM
guys, patulong naman how to overclock my system... :)

athlonxp 2600+ barton @2.08ghz
MSI kn2delta
kingmax ddr400 1gig total
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 04, 2005, 12:00:13 AM
@zero1978
asking for the same advice follow spoliarium's link:

AMD OC guide (http://www.madshrimps.be/?action=gethowto&...=112&howtoID=43)

ako athlon 2500+ @1.84Ghz planning to overclock it to 3200 kung kaya...
ano temp ng case and cpu mo?

 
Title: AMD Overclocking Guide
Post by: zer0 on May 04, 2005, 12:17:13 AM
...high performance settings ngayon sa bios ko
...2.5 3 3 7 ata ang mem timings
ang fsb 166 parin...

temps ko ngayon idle is 49-50c... load 58-60c (farcry 1.3)

wla kasing core cell ang k7n2 delta l ko e... kaya naguguluhan pa ako mag overclock ng processor...
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 04, 2005, 12:53:46 AM
para magstart sana ako to oC my rig a bit pero bat wala sa bios ko ang softmenu II/III paano ko man to machange ung multiplier niya?
Title: AMD Overclocking Guide
Post by: gizmic on May 04, 2005, 01:28:01 AM
on my old barton its 40-50C in summer time and 35-45C in good temps



 
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 04, 2005, 01:51:56 AM
@gizmic
ano cooling system mo? how come wala sa bios ko ang softmenuII/III
Title: AMD Overclocking Guide
Post by: gizmic on May 04, 2005, 02:07:20 AM
i use a Aero 7+

i'm not sure what are you talking about you....
 

different boards have different names for its overclocking menu in bios just try to find it or maybe take screen shots of them  
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 04, 2005, 09:42:38 AM
i downloaded Clockgen, is that advisable to use?
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 06, 2005, 10:37:48 PM
guys i have a 2500+ barton on a EP-8RDA3+ i can't fins a decent guide...all they they is that they increased the multipliers pero i can't with my mobo kasi wala siya softmenu sa BIOS ok lang ba gumamit ng clock gen?
Title: AMD Overclocking Guide
Post by: gizmic on May 09, 2005, 04:11:53 AM
your board's overclocking menu in bios is the "Advance Chipset Features" and then for voltages its in the "Power BIOS Features"

and i dont advice overclocking in windows
Title: AMD Overclocking Guide
Post by: DylanJames on May 09, 2005, 04:20:11 AM
overclock in bios as much as possible.

where do you exactly have difficulty in overclocking?
Title: AMD Overclocking Guide
Post by: gizmic on May 09, 2005, 04:41:46 AM
well as far i can see things going for him he can't seem to find the menu lol

and yes your board has multiplier settings  
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 09, 2005, 01:02:29 PM
im really new to this but i really want to try it out...

difficulty: i don't know what values to alter. kc alam ko dapat ung multipliers eh wala naman sa Advance Chipset Features, ang fsb values lang ba akong gagalawin? pati mga tol meron ba kayo steps na pwede kong sundan...para mas claro...thanks talaga sori sir gizmic kung sobrang newbie mga tanong ko...:)
Title: AMD Overclocking Guide
Post by: gizmic on May 09, 2005, 02:01:10 PM
dont worry i was a newbie at a time

multiplier in your bios should be called "CPU Clock Ratio"

btu since your cpu is a 2500+ why dont you try the standard 2500+ to 3200+ overclock which is done but changing the fsb to 200

in overclocking its trial and error and always bit by bit dont rush things because you need to test the system if its stable that those speeds like play a game or something run some benchmarks would do

if you system isn't stable it means it needs more vcore  
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 09, 2005, 06:17:03 PM
i have prime95 and sandra lite would that be enough to stable test my rig? fsb  to 200 and thats it? wala ako muna galawin sa voltage o AGP or anything? ung fsb lang to 200? tnx bro for understanding....
Title: AMD Overclocking Guide
Post by: gizmic on May 09, 2005, 06:36:41 PM
yes see if you rig can run stable in 200fsb remember to make your ram also run 200 (1:1 ratio)

if it crashes in games or test feel free to increase your vcore abit  
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 12, 2005, 12:53:52 PM
@gizmic
sir if ever you go online please help me out! i did what you said i raised the fsb to 200. you also told me that the ram should run on 200mhz too so i looked through the bios and the only thing in mhz with related to memory is the 'memory frequency' and when i changed my fsb from 166 to 200 the mem freq automatically changed too. my pc restarted, it told me to wait and it restarted again but this time everything i see is a black screen and thats it...kahit ung POST screen wala, kahit ung display ng vid card info rin...i checked the digital clock on my board which will inform you which error it is and it displays C3 which means its a problem with the memory. refering to my manual it states that it is either 1.compatibility issue of memory 2.wrong insertion of memory or 3. damaged memory... since it worked fine before i OC'd it, then it could only mean item number 3...is there anything i can do to fix this without buying new memory modules?
Title: AMD Overclocking Guide
Post by: gizmic on May 12, 2005, 01:43:54 PM
check your manual and look for Clear Cmos its to restart your bios to default either by putting a jumper or by taking off your cmos battery on the board dont worry your ram is ok since its a pqi 400mhz(200fsb) your parts are capable of running it at those speeds unless your specs are fake lol btu i dont think so anyway just clear cmos and tell me how it goes

now we know it cant post so you only need more voltage its either the ram volts or the cpu volts  
Title: AMD Overclocking Guide
Post by: theDUD3 on May 12, 2005, 01:46:59 PM
@shadow

you should've loosened your memory timings before you set your fsb to 200... first thing to do is to reset your cmos/bios to default, then start overclocking bit by bit. =)
Title: AMD Overclocking Guide
Post by: tomodachi_jaded on May 14, 2005, 11:24:15 PM
sir's can anyone guide me in overclocking my amd sempron 2400+ ? hehe I want to try if sempron can be oveclocked to its fullest :-)  
Title: AMD Overclocking Guide
Post by: tomodachi_jaded on May 14, 2005, 11:35:38 PM
oh by the way im using redfox m7vig400 board with the said sempron
Title: AMD Overclocking Guide
Post by: X3ME15 on May 15, 2005, 12:56:03 AM
@tomodachi_jaded

bro.. anong chipset yang mobo moh? VIA or Nforce2?

if VIA eh maganda gumamit nalang overclocking software.. use CrystalCPUID for changing fsb/voltage (lock multi kze mga semprons eh)

if Nforce2 eh ok sa BIOS nalang mag-overclock

we got the same proccy bro.. reached mine @ 230fsb (2.3Ghz using a SLK900u heatsink) 1:1 w/ 2x256 ddr400 twinmos value rams.. can reach 250fsb (2.5Ghz) w/ better rams though..
Title: AMD Overclocking Guide
Post by: Gunzoid on May 15, 2005, 08:01:42 AM
Quote
guys, patulong naman how to overclock my system... :)

athlonxp 2600+ barton @2.08ghz
MSI kn2delta
kingmax ddr400 1gig total
Try this:

11.5x200
start at 1.725v
MEM Timing -> 2.5-3-3-11

-or-

11x200
start at 1.65v
MEM Timing -> 2.5-3-3-11

Test it with prime95 maximum heat, if it fails, raise the voltage by .025v. If ok with the voltage, raise the FSB by 1 and then test it.

Mine can go actually at 200x11 at 1.65v on my barton 2800+. But now i'm in 11x206 2266mhz 2.5-3-3-11 PQI mems.

Remember to keep your CPU under 69c.
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 15, 2005, 05:09:48 PM
@gizmic
fake hehe dang i forgot that the memory modules i have 333 not 400, i should have checked first...one of them is damaged and the other one is still alive

@theDUD3
thanks tol for the advice, pero after 166, 200 naman un agad...anyway gonna order some new memory modules...
 
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 15, 2005, 10:55:16 PM
correction on my last post 400 pala ang memory ko not 333 so it should have worked diba? sunog ung isang memory i have to buy a new one pero buhay pa ang isang 256 400. what could have gone wrong gurus?
Title: AMD Overclocking Guide
Post by: X3ME15 on May 15, 2005, 11:09:55 PM
@shadow.dweller

maybe a faulty mem talaga.. just waiting to burn-up

or

bumigay under stress bec. of high voltages and o/cing
Title: AMD Overclocking Guide
Post by: shadow.dweller on May 16, 2005, 12:34:56 AM
@X3ME15
hmmm...most probably, pero bakit sa mga iba ayos lang i-oC ang fsb and mem frequency from 166 to 200 w/out worries?

dang pati naman ung slot 1 ng memory sira na. i just found out kasi dun galing ung burned out na memory and i tried to place the 2nd 256mb (originally slot 3) to slot 1. di lang man dumadaan sa POST. bale frequent restarts ung parang nagluloop lang ang pagrestart.
Title: AMD Overclocking Guide
Post by: gizmic on May 16, 2005, 01:17:30 AM
lol volts ehheheh my cpu has seen 2vcore my ram already taste running on 3.2v

maybe psu unstable or some other things like not enough cooling  
Title: AMD Overclocking Guide
Post by: X3ME15 on May 16, 2005, 03:03:06 AM
@shadow.dweller

every mem sticks are different.. some lasts and some burn.. stroke of luck lang talaga kung tumagal ang hardware under stress.. value/generic ones are not designed that way..

also unstable rails in the PSU may also contribute w/ the hardware failure.. like gizmic has said..
Title: AMD Overclocking Guide
Post by: gizmic on May 16, 2005, 09:27:02 PM
hehe X3M315 lately many companies been releasing Winbond UTT chips on their value Series ram they are sweet to overclock  
Title: AMD Overclocking Guide
Post by: X3ME15 on May 17, 2005, 12:05:52 AM

di ko sure kung baket puro winbond UTT chips ang gamit.. baka they've gotten a sweat deal w/ the manufacturers..
Title: AMD Overclocking Guide
Post by: barurutor on May 26, 2005, 11:11:53 AM
190 x 10 lang akin :(

8RDA+ rev 1.1 (not yet Nforce2 Ultra 400 chipset)
AXP 1800+ Tbred B - 1.625V
CAK4-88T
Twinmos Speed Premium 2x256MB AA4T (supposedly Winbond UTT) 2.7V

Di kasi stable sa 3d games kapag 195 pataas :(
Title: AMD Overclocking Guide
Post by: zer0 on May 27, 2005, 12:16:32 AM
tnx sa friend(cromax) ko... 2.2ghz na ang processor ko :D

(http://img158.echo.cx/img158/9955/untitled10ij.jpg)

(http://img12.echo.cx/img12/6695/untitled22rs.jpg)

...pwede pa ba ito i overclock further?
Title: AMD Overclocking Guide
Post by: zer0 on May 27, 2005, 01:25:48 AM
(http://img225.echo.cx/img225/9200/untitled11pq.jpg)
Title: AMD Overclocking Guide
Post by: zer0 on May 30, 2005, 11:02:08 AM
athlonxp 2600+ @2.2ghz
200x11@1.7v
idle: 52c
load: 65c

geforce 6800 12p6v@385/835
76.45XG drivers
directx9.0c
idle: 57c
load: 66c
 
Title: AMD Overclocking Guide
Post by: spoliarium on June 06, 2005, 10:25:59 AM
Check out the "Venice" A64  overclock here:  http://www.hexus.net/content/reviews/revie...mlld19JRD0xMjU1 (http://www.hexus.net/content/reviews/review_print.php?dXJsX3Jldmlld19JRD0xMjU1)
Title: AMD Overclocking Guide
Post by: Manz069 on August 09, 2005, 09:54:16 AM
wow! thoroughbred! you can try FSB = 233
it's a thouroughbred it's most likely to be able to take 233FSB
they are rare, lalo na yung thoroughbred-b
you're lucky to have it
Title: AMD Overclocking Guide
Post by: gizmic on August 09, 2005, 04:25:50 PM
Quote
wow! thoroughbred! you can try FSB = 233
it's a thouroughbred it's most likely to be able to take 233FSB
they are rare, lalo na yung thoroughbred-b
you're lucky to have it

and yeah zero normal socket a maxs out about 2.2-2.3ghz with air cooling unless youre using a XP-M cpu like me :D
hmm fsb is not a cpu limitation to get high fsb you need good rams and a board that can do very high

 
Title: AMD Overclocking Guide
Post by: zer0 on August 09, 2005, 06:06:16 PM
Quote
wow! thoroughbred! you can try FSB = 233
it's a thouroughbred it's most likely to be able to take 233FSB
they are rare, lalo na yung thoroughbred-b
you're lucky to have it
we tried increasing the fsb further... pero it hangs already sa 3dmark2k5 so di na namin tinuloy :)
Title: AMD Overclocking Guide
Post by: gizmic on August 10, 2005, 05:56:27 PM
Quote
di ko sure kung baket puro winbond UTT chips ang gamit.. baka they've gotten a sweat deal w/ the manufacturers..
UTT are cheap UTT means UnTesTed these UTTs can be BH5

not testing the stick saves alot of money but heh since they are UTT they are not guaranted to run like a normal BH5

BTW those twinmos AA4T are UTT CH6 not BH5s anyway i dont know much of what a CH6 can do maybe its a high latency type  
Title: AMD Overclocking Guide
Post by: rossifumi46 on August 19, 2005, 08:18:15 PM
help with overclocking my system, its kinda old so im sure overclocking would help it, i really have no idea how to overclock

athlon 1200 1.2 mhz
epox 8kha+
256-256-128 for a total of 640 mb ddr pc266
80 gb 7200
160 gb 7200
geforce4 mx440
SB live 5.1


 
Title: AMD Overclocking Guide
Post by: spoliarium on August 19, 2005, 09:12:47 PM
@rossifumi46, check out:  http://www.ocinside.de/html/workshop/amd_s..._overclock.html (http://www.ocinside.de/html/workshop/amd_socketa_overclock.html)
Title: AMD Overclocking Guide
Post by: johnl on November 01, 2005, 06:40:48 PM
Mga Sirs, Patulong naman...

I've got a

Sempron 64 2800+ (stock at 1.6Ghz)
ASRock K8Upgrade nForce3 bios v P1.30 (Cool n Quiet disabled)
2 x 512mb DDR400 TwinMos
450w Task PSU
Inno3D 6600 OC

I OCed in BIOS (w/ stock HSF) to 2.4Ghz

When I check System Properties & CPU-Z lumalabas 2.4Ghz nga
but after playing for a while or pag iniwan ko lang bukas bumabalik sa 1.6Ghz

With aircon off, my temps are:
MoBo 41c
CPU   41c

With aircon on, about minus 5 to 10c from my temps above.

Never pa akong umabot sa 50c which I think I can eliminate
the possibiltiy of overheat issue.

Ano kaya ang problema? bat bumabalik from 2.4Ghz to 1.6Ghz
after a while?

Please help mga sirs.

Thanks in advance!
Title: AMD Overclocking Guide
Post by: theDUD3 on November 01, 2005, 06:50:45 PM
hmm... try disabling cool & quiet in the bios. :D
Title: AMD Overclocking Guide
Post by: johnl on November 01, 2005, 06:59:03 PM
@Sir theDUD3,
Cool & Quiet in BIOS is diabled sir.
Ano pa kaya ibang cause? =(
Title: AMD Overclocking Guide
Post by: himuradrew on November 04, 2005, 07:15:46 PM
Hi guys!!

I've got a couple of questions with regards to overclocking my Athlon 64 2800+ (Clawhammer core).

Since I've got crappy PC3200 RAM, I can't overclock the RAM that much (even a 30Mhz OC messes up my system real bad), so I've hard to use dividers and drop the HT link speed. I've been able to reach a speed of 2.2GHz (245HTT x 900 w/ RAM at 200.5MHz) at stock cooling (and stock voltage) by increasing the FSB/LDT multiplier to around 245 and dropping HT link speed to 600Mhz plus dropping RAM speed to DDR333.

I was thinking of trying to see if I can overclock more by further reducing the HT link speed and reducing RAM speed more, in order to increase the FSB/LDT multiplier. My question is that will doing so, decrease system performance? Or does everything depend on how high I can get the HTT to be?

Thanks!!!
Title: AMD Overclocking Guide
Post by: jayzmitz11 on November 04, 2005, 07:42:11 PM
himuradrew try baka magwork kasi sakin ganito yung config ko eh ..

ginawa kong ddr333 yung ddr400 then htx3 25fsb yung nagawa kong stable and prime95 stable . 11mhz increase in my rams so 211mhz . generic lang din ram ko pero nilagyan ko ng copper cooler para sure then 2.7vdimm cpuv is 1.65 kinda high but its okie . ginawa kong 270fsb pero nagrestart 2.7vdimm hindi padin kaya hindi ko pa siya ginawang 2.8 maybe later pero stay muna ako sa 258fsb and yung ram ko is single 512 1x kaya niya 265fsb pero may error sa prime pero sa superpi wala .. so 258pinaka stable .. and nagrebios din ako para mas okie yung pagoverclocked ko msi k8neo fsr/lsr rebios to msi k8neo platinum
Title: AMD Overclocking Guide
Post by: axlrose on November 21, 2005, 07:52:37 AM
Hey! Overclocking have many ways... to be sure of: first, you must know the basic in overclocking; second, know the features of each peripherals what you have; third, you may use proper cooling and the last burn-in you toys (PC) step by step. Goodluck!
Title: AMD Overclocking Guide
Post by: powchi on November 22, 2005, 01:10:03 PM
Quote
Quick and dirty A64 clocking guide **UPDATE** X2 OC

Overclocking breaks things which you alone are resposible for, not AMD, not intel, not Nivida, not Ati, not xyz mobo maker. Proceed at your own risk.

this is a quick and dirty guide. I am aiming for simplicity since it's not all that complicated to OC A64's even for first timers. I am also aiming for safty so you don't kill anything so lower volts are advocated. Just good clean fun to get an FX or better from your budget chip.

VERY IMPORTANT to keep in mind at all times is hypertransport needs to be around 1000, meaning LDT x HTT (aka FSB) ~1000 or less.

Now we will Isolate then Consolidate.

What that means is you need to test three parts of the CPU subsystem (chipset, chip, and memory) to find max speeds of each.. Then combine them for some sort of optimal overclock.

ISOLATE
Don't forget to take notes.

1. Max HTT/FSB should be first ..*only works if motherboard has locks. Most A64 boards do today. Sata 1 and 2 are not locked on some nforce mobos use 3 and 4.
-set CPU multi to 6 or 7, this will take CPU out of equation
-set memory to SPD and 100, this will take memory out of equation
-Increase HTT/FSB up until you fail to boot or there abouts, back down 5%, (HTT * 0.95), this is your max safe HTT.

2. Max Chip capable
- Set multiplier to it's maxium
-Set vcore to 1.6 -1.65 for 130nm chips, 1.50-1.55 for 90nm chips
-Set mem to SPD and 100, this will take memory out of equation
-starting with HTT 200 raise in about 5Mhz increments up to boards max found earlier or until you start failing PRIME95 which will probably happen first..only give it 5 minutes max, that's good enough for now.
-At the point it starts failing within that 5 min time period, back down 5%, (CPU MHZ * 0.95), thats your max CPU speed, now test prime again at 95% for 12 hour for stable.
Prime 95 Link http://www.mersenne.org/freesoft.htm (http://www.mersenne.org/freesoft.htm)

3. Memory MAX

It depends what you want and type of mem you chose, LL or Bandwidth but must keep 1T (command rate) because A64 suffers big time with 2T.

-For high bandwidth set mem setting to 200 and 2.5-4-3-7 1 T and give it boards max volts, or for LL set mem setting to 200 and 2-2-2-7 1 T and give it boards max volts. (up to 2.9Vdimm is safe with all ram) ( Caution DFI/ABIT users -- do not exceed 3.0V unless you know what you are doing!!!)
-Set CPUs multi to 6-7, again to take it out of equation.
-Raise HTT up to boards max or until you start failing memtest86 test 5 and 6 http://www.memtest86.com/ (http://www.memtest86.com/)
-When you start failing memtest86 test 5 and 6, back down 5%, (HTT * 0.95), thats your max MEM speed.

CONSOLIDATE

The most important thing to keep in mind is CPU Speed is king. So now that you know your CPU speed from above, use it. Say it's Winchester 3000 and it's 2650Mhz prime stable and with it's 9 multiplier it needs 295 HTT to get there (9x295=2650)...NP right, but you got some value ram which only clocked to 210Mhz from your above testing. Well obviously you can't run the ram at 1:1 which would be 295Mhz, you must use a mem divider. You can use the memory divider (mem setting) to get as close as possible to your mem max found above.

This is the rough way to calculate IE close enough..

Memsetting setting
200 = HTT Mhz
183 = HTT x .90 = Mhz
166 = HTT x .83 = Mhz
150 = HTT x .75 = Mhz
133 = HTT x .66 = Mhz
100 = HTT x .50 = Mhz

What can my 210Mhz memory run in this config?
295 x .83 = 244 = not a chance
295 x .75 = 221 = not quite
295 x .66 = 195 Yes, but slow.

You have two choices, try and tighen timings and run 195 which is perfectly OK choice. Or Change CPU multiplier and start over. Ideally you want for max CPU and memory to coinside...Does'nt always work the way you want... My Ballistix below is 245Mhz stable but I'm running less for more CPU speed which always wins. You should too.


To help you along in the "consolidate" phase user Gogar has made a niffty script found here.
Just put in those maximuns found under the "isolate" phase and it will spit out the best choices.

After you go though these steps , take notes, you'll become more familiar with the whole tweaking process (learn by doing) and will be able to dial in better frequencies, timings, voltages, and faster too. But this should get you pretty close to safe and optimal speeds



UPDATE: Dual core CPU stability testing
X2 is not any different than a single processor overclocking but for volts and when prime testing CPU(s) for stability:

Volts should not exceed 1.45 for safe operation!

Prime95
1. Make two folders with Prime95
http://mersenne.org/gimps/p95v2413.zip (http://mersenne.org/gimps/p95v2413.zip)

2. Starting two instances: Launch both instances from each folder and choose: torture test > small FFT's > click OK.

3. Next, launch taskmanager and set affinity of the first instance of prime to CPU 0 only. The other instance of prime to CPU 1 only.
Title: AMD Overclocking Guide
Post by: powchi on November 22, 2005, 01:33:20 PM
THE DEFINITIVE DFI A64 OVERCLOCKING GUIDE

http://www.dfi-street.com/forum/showthread.php?t=20823 (http://www.dfi-street.com/forum/showthread.php?t=20823)
Title: AMD Overclocking Guide
Post by: Capcom on January 11, 2006, 04:32:03 AM
what is HTT ? same as FSB ?

Are there any Sempron 64's na parang couterpart ng Venice na god steppings ? i heard some Sempron 2800 at 3100 reaching 2.6 to 2.7 ghz

at all Sempron 64's based on 90nm ? or yung may SSE3 lang ang based sa 90nm ? kasi may Sempron 64 na may SSE3 yun iba wala
Title: AMD Overclocking Guide
Post by: edge808 on January 11, 2006, 10:23:50 AM
i can't seem to find the multi controller, does it appear as cpu multiplier in the bios or is it labelled differently,

using the biostar 6100 m9 board w/ winchie 3200.  I wasable to run at 2.4 but had to bring up my vcore by .10 otherwise i can't even run super_pi without errors.

could it be my ram? using geil value (blue) dc channel stocked at 2,5-4-4-8.

and what's a safe heat reading on amd64s?

thanks
Title: AMD Overclocking Guide
Post by: [JaNuS] on April 28, 2006, 01:34:43 PM
how do you overclock aside from using the bios? maliit lang kasi oc capability ng bios ko. 200mhz-232mhz lang. may utility ba or software na puwede magamit?
Title: AMD Overclocking Guide
Post by: Noobinator on April 28, 2006, 02:15:05 PM
Clockgen
Title: AMD Overclocking Guide
Post by: [JaNuS] on April 28, 2006, 04:47:17 PM
i was able to detect my pll but there are no buttons for clock gen to change the settings for fsb, multiplier etc...

am using a sempron 2600 @ 1.8ghz and an ecs k8m800-m2 mobo w/ a generic 512 ddr 400 memory... i know it's the cheapest... just wont be satisfied until i get the limit on this... i've oc'd all my computers to their limit and i wont let this one pass... hehe...
Title: Re: AMD Overclocking Guide
Post by: duh.dong on August 10, 2006, 07:58:12 PM
hi .. maybe you guys could help me out in owerclocking my rig?

A64 3000+ (venice) (stock HSF)
MSI K8N Neo4
2x512 DDR400 (dual-channel mode)
PowerColor ATI X700EZ 256/128
120GB HDD
LiteOn DVD-Writer

.. thanks .. :)
Title: Re: AMD Overclocking Guide
Post by: axlrose on August 10, 2006, 09:54:06 PM
Hmmm...
Overclocking needs basic knowledge of some features of the mobo, memory, etc.

Distro does not recommend it that's also void your warranty. But, if you really does.. so, go on....

In MSI, to many option to OC that mobo.
but be sure that your adjustment does not exceed the limit which stated in the manuals... then same as the other computer parts.
Title: Re: AMD Overclocking Guide
Post by: duh.dong on August 17, 2006, 05:23:18 PM
any idea how to OC my rig? one that would be stable and that my stock HSF would be able to handle ?
Title: Re: AMD Overclocking Guide
Post by: jorussic on August 17, 2006, 05:33:21 PM
ok yang rig mo. pwedeng pwede pang-OC. have you tried anything yet or is this your first time OCing?
Title: Re: AMD Overclocking Guide
Post by: duh.dong on August 17, 2006, 09:48:12 PM
ok yang rig mo. pwedeng pwede pang-OC. have you tried anything yet or is this your first time OCing?
haven't tried anything yet .. kasi newbie ako sa pagdating sa OC .. pero gusto ko talaga syang matutunan .. >:D
Title: Re: AMD Overclocking Guide
Post by: duh.dong on August 18, 2006, 08:54:12 PM
i'm a bit clueless in what CPU ratio should i use and what setting should i use .. coz by default the CPU ratio is set to "Adjust startup" .. also, the setting that i did with the memory is set to default (200MHz) but i've changed the Memory Timing to 1T ..
what would be the advisable setting should i use?

i tried using the 250 FSB with 4x HTT .. nag-boot naman yung PC ko but still clueless kung tama or mali yung nagawa ko ..
Title: Re: AMD Overclocking Guide
Post by: jdg on September 16, 2006, 09:06:30 AM
venice 3000+
msi k8n neo4-f
pqi 512mb ddr333

stable oc at 2250mhz
mems @ 204mhz
memory settings  166 12-6-3-3-2.5 sa bios
FSB = 250 HTT = 4x
http://valid.x86-secret.com/show_oc?id=121880 (http://valid.x86-secret.com/show_oc?id=121880)

current setup
oc @ 2295mhz
mems @ 208
FSB = 255 HTT = 2.5x
http://valid.x86-secret.com/show_oc?id=121863 (http://valid.x86-secret.com/show_oc?id=121863)

tama ba itong pag oc ko? :unsure:
Title: Re: AMD Overclocking Guide
Post by: athlonFan on October 22, 2006, 12:52:01 AM
Athlon64 3000+ 1.8GHZ @ 2700GHZ
1GB Geil DDR400
Epox 6100 matx
7300GT 256mb ddr3
http://valid.x86-secret.com/show_oc?id=128390
(http://valid.x86-secret.com/cache/128390.png)
repost...
Title: Re: AMD Overclocking Guide
Post by: barurutor on October 27, 2006, 12:01:26 AM
stock cooling yan jason?
Title: Re: AMD Overclocking Guide
Post by: Al on October 29, 2006, 05:19:17 PM
grabe. i tried oc'ing my venice 3000+. na-realize ko lang ngayon kung gano akong ka engot mag oc. hahaha. komplikado na pala ngayon.
Title: Re: AMD Overclocking Guide
Post by: barurutor on October 30, 2006, 11:04:34 AM
at least venice yung sa inyo

winchester yung 3000+ ko... baka malasin ako't non-overclockable itong nakuha ko kay willie
Title: Re: AMD Overclocking Guide
Post by: dulber on October 30, 2006, 12:16:16 PM
Al: 3000+ Venice ka na din, ha.
Redfox Biostar 6100-M9 4X HT
Athlon XP 3000+ @ stock vcore with 278Mhz FSB
PQI DDR400 @ stock vdimm  running 228Mhz Async 166Mhz
Palit 7600GT Sonic 256Mb
http://valid.x86-secret.com/show_oc?id=133948
(http://img150.imageshack.us/img150/6531/278mhzpq6.jpg)
Title: Re: AMD Overclocking Guide
Post by: Al on October 30, 2006, 01:31:21 PM
almost one year na. hehehehe

stock HSF ba gamit mo?

plano ko kasi bumili ng freezer 64 pro kay waycool e.
Title: Re: AMD Overclocking Guide
Post by: Heishiro on October 30, 2006, 01:38:10 PM
@ fafa Al,

bro ok ang freezer 64, now im hitting 2.6ghz on air by this HSF
best buy na to for its price. hope na ma-OC mo din yang venice mo fafa ^_^
Title: Re: AMD Overclocking Guide
Post by: dulber on October 31, 2006, 03:52:03 AM
almost one year na. hehehehe
stock HSF ba gamit mo?
plano ko kasi bumili ng freezer 64 pro kay waycool e.

nyak! huling-huli na pala ako sa balita.
Tt Big Typhoon gamit ko plus Delta Tri-blade 25mm at 7V
Title: Re: AMD Overclocking Guide
Post by: Al on October 31, 2006, 10:57:46 AM
buti yung 6600GT ko simpleng adjust lang sa sliders. hehehe.

@ fafa Al,

bro ok ang freezer 64, now im hitting 2.6ghz on air by this HSF
best buy na to for its price. hope na ma-OC mo din yang venice mo fafa ^_^
onga e. i've been reading stuff. halos kapareho lang nung Zalman CNPS9500 at less than half the price at TPC.

pampa-tahimik din. stock fan's been noisy ever since i stuck my finger at the fan blades. ouch.
:lol:
Title: Re: AMD Overclocking Guide
Post by: athlonFan on October 31, 2006, 11:58:51 AM
@Al, Barurutor,

Stock cooling un, temps hit as high as 58c.
Title: Re: AMD Overclocking Guide
Post by: barurutor on October 31, 2006, 01:39:44 PM
ano idle temp jayson?

Title: Sempron 3000+ (1.6GHz) won't go past 240fsb (1.9GHz)
Post by: shievary on November 19, 2006, 11:20:17 PM
MSI K9N Neo-F yung motherboard ko tapos generic lang memory (512MB DDR2-533, "Zeppelin" yung nakataktak sa mga mem chips nya) running in single channel at the moment (kulang pa kasi ng 1 pang 512MB  :angry:). tinataas ko lang yung fsb ng cpu ko tapos hanggang 240fsb lang cya, kasi pag lumampas na, d na nag POST. nka auto ang HT link. medyo noob pa me sa overclocking options ng AMD procs (Intel kc dati rig ko) at hindi ko na kabisado yung concept ng ddr-2 sa AMD ngayon regarding cpu bus:memory fsb. hindi na po ba pwede yung 1:1 ratio ng cpu at memory? kasi tumataas yung bus ng memory ko if tinataas ko yung bus ng CPU. di po ba 266mhz po yung running stock speed ng ddr2-533? d po ba pwede i-lock ko yung mem bus ko? tapos aabot kaya ng 266mhz yung sempron 3000+ am2 para 1:1 yung labas cpu at ng stock setting ng ddr-533? pa tulong naman mga peeps! enlighten me please sa situation ko...  ^_^ thanks! :happy:
Title: Re: AMD Overclocking Guide
Post by: dom_08 on June 24, 2007, 10:06:12 PM
hahahah... di ko alam ginagawa ko....
naninibago sa bios...
hahaha

bahala na.. i'll post some screenies in a little while..
can anyone point me which softwares to use to check stability?




edit:

tried a bit of oc already...

currently at:

Bus Speed: 230MHz
Multiplier: 11x
HT Multiplier: 4x
core clock speed: ~2500MHz

i'm using a AMD Athlon 64 x2 4400+ brisbane

clueless pa rin
hahahah

hopefully i'm on the right track.. hihihihi

edit ulit:

(http://img516.imageshack.us/img516/8789/untitled3qb8.jpg)

mababa pa rin yata... hihihihi..
target ko at least maka extra 25% (or 3GHz)... pero mas ok kung 50% (or 3.6GHz)
hahahaha.. ^_^

ayaw ko baguhin ang voltage.. sana kayanin
hahahahah

@shievary
try mo i-set sa 200MHz yung memory clock speed mo kung naka set sa 266 ngayon.. ^_^
kanin di rin nag-post yung akin.. panic mode..hahah.. naalala ko DDR2 667 nga lang pala ako.. hahahaha
Title: Re: AMD Overclocking Guide
Post by: Heishiro on June 26, 2007, 09:16:10 AM
@dom,

ayus yan fafi!!! :silly:
try for 3ghz!!! FTW
Title: Re: AMD Overclocking Guide
Post by: dom_08 on June 26, 2007, 11:17:53 AM
@dom,

ayus yan fafi!!! :silly:
try for 3ghz!!! FTW

hahah.. sige sige.. i'll try to isolate the limit of each component... tulad nung sa guide na pinost earlier... hehehehe... ^_^

target ko talaga at least 3GHz... hihihihi..
pero feel ko di kakayanin ng ram ko.. hahahahaha
Title: Re: AMD Overclocking Guide
Post by: puto_binan on August 14, 2009, 09:30:17 PM
Sir, need help on OC my rig.

Athlon XP 2500+
MSI K7N2 Delta2 - LSR
Team Elite 1GB ddr400 limited edition (with heat sink)
GeCube ATI Radeon 9550 with catalyst driver
Aero Lite 7

I would like to know how far can I go with my rig. Kindly help me on tweaking my mobo, etc.

Thanks
Title: Re: AMD Overclocking Guide
Post by: Guruphils on August 14, 2009, 10:56:19 PM
Sir, need help on OC my rig.

Athlon XP 2500+
MSI K7N2 Delta2 - LSR
Team Elite 1GB ddr400 limited edition (with heat sink)
GeCube ATI Radeon 9550 with catalyst driver
Aero Lite 7

I would like to know how far can I go with my rig. Kindly help me on tweaking my mobo, etc.

Thanks

http://www.extremeoverclocking.com/reviews/motherboards/MSI_K7N2_3.html

but I suggest you stay away from changing the voltages' values :D
Title: Re: AMD Overclocking Guide
Post by: puto_binan on August 15, 2009, 10:40:32 AM
Do I need extra power (PSU) so that I could OC my rig? how much? Currently, I have 350W PSU installed.
Title: Re: AMD Overclocking Guide
Post by: RandomCore on December 03, 2009, 06:37:02 PM
Quote
Do I need extra power (PSU) so that I could OC my rig? how much? Currently, I have 350W PSU installed.

depende.... ano ba CPU and video card mo?

OT. buhay pa pala itong thread na ito.... CoreXP is me, now RandomCore, 2003 pa ito ha, kainitan pa ng P4 vs Athlon XP...
Title: Re: AMD Overclocking Guide
Post by: baktol on December 23, 2009, 03:50:58 PM
Just sharing this very informative article on overclocking the Phenom...

http://www.ocia.net/articles/k10overclock/page1.shtml (http://www.ocia.net/articles/k10overclock/page1.shtml)
Title: Re: AMD Overclocking Guide
Post by: raiden17 on August 16, 2017, 10:08:23 AM
Kuya pano po i unlock 4th core paturo po step by step
Mobo:emaxx mcp6 1d3 icafe v2.0
Processor:amd atlhon ii x3 445
Title: Re: AMD Overclocking Guide
Post by: splerdu on August 17, 2017, 01:05:13 AM
^ really depends on your mobo's BIOS. Best try your luck finding a forum of emaxx users

Anyways, for ASUS boards:
https://www.youtube.com/watch?v=U4C37im049s