Author Topic: Celeron 566 Overclocking ( was Thread Title )  (Read 4933 times)

Offline dean

  • Administrator
  • Member
  • *
  • Posts: 3517
    • http://www.pinoypc.net
Celeron 566 Overclocking ( was Thread Title )
« Reply #20 on: May 16, 2002, 09:32:14 PM »
try running a higher voltage.  i'm thinking your overclock might not be stable.
Make yourself heard
Portable Strobist Kit for Rent!
Includes: 2in1 shoot thru/reflective umbrella, lightstand, RF trigger/receiver, 8pcs AA sanyo eneloop, nissin di622, gel filters

jermix

  • Guest
Celeron 566 Overclocking ( was Thread Title )
« Reply #21 on: May 16, 2002, 09:35:36 PM »
Right, what voltage do you suggest?, Also the devider is on 1/3 or 35, do I need to make it higher, or that's fine?

Thanks again, Jermix.

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8844
  • Every end is a new beginning
    • PinoyPC
Celeron 566 Overclocking ( was Thread Title )
« Reply #22 on: May 16, 2002, 10:20:41 PM »
35 mhz PCI bus speed is quite fine (tolerance speaking).  But if you can run it higher then that's good as well (the FSB, I mean).

As for voltage, the rule of thumb is to keep going up until it gets stable (or until it gets too hot).

Good lu

jermix

  • Guest
Celeron 566 Overclocking ( was Thread Title )
« Reply #23 on: May 16, 2002, 11:36:39 PM »
Louie, thanks pare, I will try 1.85 coz I have tried 1.75 and it didn't work, I will try again and let you know =)

Jermix

Offline dean

  • Administrator
  • Member
  • *
  • Posts: 3517
    • http://www.pinoypc.net
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #24 on: July 09, 2013, 09:45:00 AM »
so did 1.85v work?
Make yourself heard
Portable Strobist Kit for Rent!
Includes: 2in1 shoot thru/reflective umbrella, lightstand, RF trigger/receiver, 8pcs AA sanyo eneloop, nissin di622, gel filters

Offline berdugoh

  • Member
  • **
  • Posts: 1113
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #25 on: July 09, 2013, 01:52:05 PM »
The Twilight Zone!

Offline dom_08

  • Moderators
  • Member
  • *
  • Posts: 7782
  • Dom Dycaico
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #26 on: July 25, 2013, 09:28:19 AM »
Tantric... case mods? :)

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8844
  • Every end is a new beginning
    • PinoyPC
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #27 on: July 25, 2013, 03:01:13 PM »
I remember Dean running PCI at 41mhz.

Offline splerdu

  • Veterans
  • Member
  • ***
  • Posts: 7015
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #28 on: July 28, 2013, 05:31:36 PM »
How about your TNT2 UTLRA?
fhtagn

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8844
  • Every end is a new beginning
    • PinoyPC
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #29 on: July 29, 2013, 08:46:06 AM »
No, that was the GeForce2 UTLRA. I sold that to Bryan hahaha.

Offline splerdu

  • Veterans
  • Member
  • ***
  • Posts: 7015
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #30 on: August 17, 2013, 07:48:11 PM »
Blast from teh past lol!

Also remember the super overclocked Pentium 700s on Intel 815. Those were very fast! Faster pa than Athlons even though the Athlon had a DDR bus and RAM. I think I got one to 980MHz on an ASUS CUSL2. 140MHz FSB!
fhtagn

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8844
  • Every end is a new beginning
    • PinoyPC
Re: Celeron 566 Overclocking ( was Thread Title )
« Reply #31 on: August 18, 2013, 11:32:47 AM »
I was really envious when you guys bought GeForce DDR video cards