Author Topic: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC  (Read 1755 times)

Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« on: October 25, 2007, 02:07:48 AM »
when overclocking which is more better when used on the M2N32-SLI, assuming they are the same Brand.
what is love? baby don't hurt me, no more.

Offline ^_^japol

  • Veterans
  • Member
  • ***
  • Posts: 2498
  • sus
    • personal folio site
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #1 on: October 25, 2007, 04:14:45 AM »
Pag intel ata timings dont matter much , its more like 1:1 ratio between FSB and ram speed, while AMD likes lower or faster timings.

HTH.

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8868
  • Every end is a new beginning
    • PinoyPC
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #2 on: October 26, 2007, 05:00:57 PM »
for ddr2 timings don't matter too much

Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #3 on: October 26, 2007, 05:58:21 PM »
really! I never knew that tagal ko ng kasing nawala sa limelight hehehe, maybe i'll get rid of my 675/ 4-4-4-12 & get an 800mhz instead then.
what is love? baby don't hurt me, no more.

Offline nmeuvdast8

  • Member
  • **
  • Posts: 1955
  • I'm back!
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #4 on: October 26, 2007, 10:55:36 PM »
go with the 800/5-5-5-12, para mas malaki head room. dont forget to set it at 1:1 ratio!

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8868
  • Every end is a new beginning
    • PinoyPC
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #5 on: October 28, 2007, 12:42:33 PM »
last time that cas ratings made a big difference was in sdram :)

Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #6 on: July 13, 2016, 01:05:16 PM »
I have no Idea now what this means lol
what is love? baby don't hurt me, no more.

Offline bravoexo

  • Member
  • **
  • Posts: 3259
  • PeopleSoft
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #7 on: July 18, 2016, 07:06:17 AM »
memory timings still
i7-3770k, GA-Z77X-UP5 TH, Dominator Platinum 16Gb DDR3 1866 C9, GTX ASUS ROG Strix 1080 SLI, Crucial M4 mSATA 256Gb, Crucia MX100-512Gb SSD, Spinpoint F1 1Tb x 2, Barracuda 2Tb Green x 3, LG E2442V x 3, GMX 2.1, HAF-932, M2 850W, MCP355, Apogee GTZ, BlackIce GTX360, G502, AVerMedia LGX, Vantec Dock

Offline Louie

  • Administrator
  • Member
  • *
  • Posts: 8868
  • Every end is a new beginning
    • PinoyPC
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #8 on: July 18, 2016, 11:41:57 AM »
Lower is better!

Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #9 on: July 19, 2016, 12:29:52 AM »
with newer systems now does it still matter to adjust these timings or boost the freq?
what is love? baby don't hurt me, no more.


Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #11 on: July 19, 2016, 01:55:28 AM »
those are old systems
what is love? baby don't hurt me, no more.

Offline bravoexo

  • Member
  • **
  • Posts: 3259
  • PeopleSoft
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #12 on: July 19, 2016, 02:09:12 AM »
If you overclock memory (since they're not linked to CPU FSB speed anymore, yes there is still merit to it, but since also, we depend on XMP nowadays, and higher DDR speed often require higher or slacker timings anyway, you have to realize, what setting you choose does a two, four or eight fold effect on memory...  it's not as precise as before, and can't be. )also voltages tweaking too have become less tolerable on the mem side)

i7-3770k, GA-Z77X-UP5 TH, Dominator Platinum 16Gb DDR3 1866 C9, GTX ASUS ROG Strix 1080 SLI, Crucial M4 mSATA 256Gb, Crucia MX100-512Gb SSD, Spinpoint F1 1Tb x 2, Barracuda 2Tb Green x 3, LG E2442V x 3, GMX 2.1, HAF-932, M2 850W, MCP355, Apogee GTZ, BlackIce GTX360, G502, AVerMedia LGX, Vantec Dock

Offline wheelee

  • Member
  • **
  • Posts: 3776
  • This is a test of the emergency sound system....
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #13 on: July 19, 2016, 09:15:52 AM »
^ so I guess it's best to leave them alone in their default or Optimum settings now.
do newer mobo now have Optimum turbo settings for mems just like for CPU's?
haven't been tinkering with PC's for the past few years lol 
what is love? baby don't hurt me, no more.

Offline barurutor

  • Moderators
  • Member
  • *
  • Posts: 3498
  • The Truth Shall Make Ye Fret.
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #14 on: July 19, 2016, 09:26:54 AM »
I guess if your modules have XMP use it.
<insert witty saying or hobby specs here>

Offline splerdu

  • Veterans
  • Member
  • ***
  • Posts: 7306
Re: 800/ 5-5-5-12 or 675/ 4-4-4-12 for OC
« Reply #15 on: July 19, 2016, 02:36:37 PM »
those are old systems
Haswell-E is same platform as the current i7 extreme line, and uses the same new DDR4 so it should still be relevant.

Here's a test for Skylake:
http://www.legitreviews.com/ddr4-memory-scaling-intel-z170-finding-the-best-ddr4-memory-kit-speed_170340/
fhtagn